Electronics Forum | Wed Feb 09 10:15:39 EST 2005 | pjc
With a properly designed and maintaned stencil, good solderpaste and board supports on the printer you can even go down to 0.4mm (16mil) with good results.
Electronics Forum | Sat Aug 25 08:22:38 EDT 2012 | omur
Thanks for the pointers. I just tried both of your suggestions - but still the "Stack overflow" message is appearing. Any other suggestions ?
Electronics Forum | Mon Aug 27 03:22:04 EDT 2012 | omur
As the machine was working before - and as it is not connected to any network and we do not use the floppy disks, I do not think that it is related to a virus.
Electronics Forum | Thu Aug 30 04:40:38 EDT 2012 | menatech
could be a hardware problem (processor board, harddrive) but this overflow message is most times software related. delete the calib file for an other trial. have you the machine software for reinstall?
Electronics Forum | Mon Aug 05 05:35:15 EDT 2013 | JB
Were are having problems emailing anyone with AT&T email address, please provide a different communication method if still interested.
Electronics Forum | Sat Jun 24 15:31:40 EDT 2006 | mark
Hello, We have found that many times for DEK265GS in under stencil cleaning unit stucks cleaning paper (non-woven rolls). DEK said that cleaning unit for DEK265 has this problem. I just looking for improvment to eliminate issue. Question to the u
Electronics Forum | Thu Aug 16 11:15:38 EDT 2012 | menatech
delete the pointer readings.dek. If the printer loads after restart is the problem a corrupt program (last printed product. if this not work could it be a problem with the DEK config file. save the the file on floppy and delete it from the m/c. the s
Electronics Forum | Wed May 20 08:38:51 EDT 1998 | Jerry
We have had really good luck with the IIT version. We use it with a DEK265 also. I am having trouble coming up with a brochure but their email address is iit@ns.net. We have ordered probably 10 to 15 stencils for use on prototype builds. We have
Electronics Forum | Wed Mar 14 20:06:54 EDT 2007 | vshan
Hi All i need some help here, currently experiencing connector leg shifted due to solder paste shifted from pad ~0.3mm. I did adjusted the reverse/forward X, Y and titah but still shifted. Product : flex circuit with 28 connector on the panel. Each
Electronics Forum | Mon Sep 03 04:05:56 EDT 2012 | omur
The issue has finally been resolved. It turns out that while checking the vision board, our engineers accidentally changed the address of the Analogue Board (which is adjacent to the vision board) - thus, leading to this startup error - with the unh
