Electronics Forum | Fri Feb 09 14:49:04 EST 2024 | erikfriesen
Its looking like this was a CPU speed issue. The BIOS defaults to X3, and it needs X7.5 for the PCA-6180E CPU card.
Electronics Forum | Fri Feb 09 01:46:55 EST 2024 | erikfriesen
I have a 2005 DEK Horizon 02i, the cmos batt was dead, so I replaced, and reset the bios. The device hangs in initialization, eventually erroring out. The vision led's blink rapidly during this period. Also, the card shows an error in device manag
Electronics Forum | Fri Feb 29 16:42:34 EST 2008 | vikkaraja
Hello again, Has anyone experience any problem with their vision system on the DEK machine. Machine had been running fine for at least one year without any major problem until this week. Machine's response is very slow especially the vision system. M
Electronics Forum | Tue Jan 30 14:18:22 EST 2024 | spoiltforchoice
It might be worth mentioning that Speedprint (now Europlacer) printers also have a calibrate using your own board capability. They arguably also target higher mix environments given that is the market the pick and place machine targets. DEK uses a v
Electronics Forum | Mon Jan 30 06:29:44 EST 2006 | robls
We are a Contract Manufacturer in South Africa. We currently have a Speedprint SP200AVI fully automatic printer with 2D vision etc etc. We require a second fully automatic printer and are busy evaluating a DEK Horizon 03i. We have found good points
Electronics Forum | Mon Nov 25 20:57:23 EST 2002 | Kermit
Thanks to everyone who has responded so far. We are going with dedicated tooling for our phone cards but not for our system cards so that takes that out of the equation for the former, will evaluate for the system bds.. Thanks for the info.. Regard
Electronics Forum | Thu Mar 30 10:02:03 EDT 2017 | Bestglobal SMT
We have a 2008 DEK horizon 03i this machine has been a very reliable system. we are having an issue with the print being offset in the x .2mm I have run 4 different boards - same issue on all. same offset. i can print the board 10 times over and
Electronics Forum | Mon Oct 06 15:04:26 EDT 2008 | mikesewell
I've installed both (at different companies),currently a MPM 125 user. The DEK seemed slightly easier to program a new board. I guess it depends on which platform you're most familiar with. The Hawkeye inspection we had is fast to setup but doesn'
Electronics Forum | Wed Sep 17 21:27:30 EDT 2008 | dekhead
I'll put a vote on MyData, but you might have problems with the volume... If you're buying used on this better off buying from MyData, they have a tendency to buy up the decent stuff off the used market, and anything left noone really wants to deal w
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723