Electronics Forum | Tue Mar 23 09:30:35 EST 1999 | Dan Hughes
Nancy, The mounting hole locations in most standard frames are the universal in both the screen and stencil industry, more over some of the newer machines clamp the frame in place. Most printers are very adjustable this way. If you were using a "qu
Electronics Forum | Thu Jul 16 13:19:06 EDT 1998 | James Vaughn
Have you tried the TETRA frame with exchangeable stencil foils? See how the TETRA frame works by looking at www.micromet.co.uk. The frame to use with the DEK is now available in the U.S. Call me at (408)562-2033 for more information. You'll never ha
Electronics Forum | Tue Mar 16 14:37:42 EST 1999 | Steve Gregory
Hi Nancy! Just as Steve and Dean said, most printers have some sort of restrictions of what frame, where the image is positioned, ect. before the stencil will work in the printer. The two manufacturers that I'm most familiar with DEK and MPM do have
Electronics Forum | Fri Feb 27 07:59:47 EST 2004 | cyber_wolf
Is it true that a DEK printer will not accept a standard 20X20 stencil. I have heard that the image on the stencil is offset as well.(you need special stencils just for DEK printers?) Do they make an adapter to accommodate standard 20X20's with cent
Electronics Forum | Wed Jun 29 11:09:26 EDT 2011 | swag
That is all we have ever used ("Zelflex" by LPKF). They work great. We have 300+ stencils stored in print drawers, probably 3'x3'x5' area. The stencils are also cheaper by more than 1/2 from our supplier. The only stencils we have in permanent fra
Electronics Forum | Thu Oct 30 15:24:07 EST 2003 | johnwnz
Hi Gerald, can you mail me soem info on this also as I'm currently runnign quickframes but would like to review what I have and how I can transfer it to the DEK I have here. John
Electronics Forum | Thu Jul 21 10:48:02 EDT 2011 | emeto
We use QTS and Vectour guard. I would prefer Vectourguard - it is very siple to set it up. However, you have to check the tension of the stencil everyday. I wouldn't trust them as 29 inch hard frame. It is always a metter of quantities. If you deal w
Electronics Forum | Mon May 02 18:54:28 EDT 2005 | MikeaJ
The answer you are looking for is part of your initial setup of the board and stencil. This information is to be found in the PCB setup menu/icon. The reason why the stencil loading pins are impacting the frame is because the default setting of the s
Electronics Forum | Fri Nov 13 11:02:46 EST 2009 | isd_jwendell
I use the LPKF model S. Operator uses a urethane(?) squeegee. Pressure and speed are controlled by the operator, which hasn't been a problem for me. The only problem I had was that I would forget to raise the PCB before I would start to squeegee the
Electronics Forum | Mon Mar 15 15:47:51 EST 1999 | Steve Schrader
| Are stencils universal from one printer to another? We are looking into the possibility of going from Solderprint 1414 manual printer to a more automated printer. We are also considering bringing some boards we currently outsource in house. I w
winsouce.jpg)
.gif)