Electronics Forum | Sun Apr 17 18:22:18 EDT 2022 | dekhead
Please clarify what you mean by "bouncing". Small up and down motions around home position? Full stroke of table movement up and down? Or somewhere in between? Does it start as soon as servo power is applied? Or not until table home movement is initi
Electronics Forum | Wed Jul 27 09:58:05 EDT 2011 | davef
Pressure printing systems Conventional stencil printing techniques have fundamental limitations as regards paste handling: The volume of paste available for printing is limited, so frequent replenishment is necessary Paste is difficult to c
Electronics Forum | Sat Nov 15 05:08:45 EST 2014 | grimus
Same side (component side) if You give me e-mail I can provide You more pictures. I'm making one stroke with same speed (I'm using closed proflow head and DEK printer). 5 mils thickness stencil. Products requirement - 3 IPC Class (75 % and more fill
Electronics Forum | Sat Nov 09 21:57:00 EST 2019 | dekhead
Not to be disagreeable, but sounds like "RichC" is describing earlier series 265 calibrations... (based upon location of PSR Amp and magnets to bypass cover interlock a 265MK1 (v. 1992-94). That "readings" calibration on your mach
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc
Electronics Forum | Tue Mar 16 14:37:42 EST 1999 | Steve Gregory
Hi Nancy! Just as Steve and Dean said, most printers have some sort of restrictions of what frame, where the image is positioned, ect. before the stencil will work in the printer. The two manufacturers that I'm most familiar with DEK and MPM do have
Electronics Forum | Thu Dec 16 15:00:20 EST 2004 | glaucon
Simple differences. Both processes require a very similar machine platform, controlled motion, vision fiducial recognition and alignment of a substrate (PCB or hybrid ceramic) to the "image", the image being either a stencil (hence stencil printing)
Electronics Forum | Wed Sep 08 08:25:26 EDT 1999 | Brad Kendall
Listed below are the issues Viking has been experiencing since the | installation of the Proflow Head: | 1. After installing new 350mm Wiper foil with metal | strip glued on it, It worked for about a week and suddenly meta
Electronics Forum | Fri Feb 16 09:30:38 EST 2007 | DEK Answer Guy
Hello PR, PumpPrint� technologies enable high throughput adhesive deposition using a screen printing platform. Careful selection of stencil material, and informed study of the design of apertures and other stencil features, enables a wide range of
Electronics Forum | Wed Oct 28 01:17:57 EST 1998 | Earl Moon
| SMT-ers | | I notice that most suppliers provide data that is eye-catching but avoid providing data of significant technical relevance, such as Cp and Cpk. It would perhaps be a wise idea for standards to be formulated in this area. | For
