Electronics Forum | Tue Jun 30 12:08:55 EDT 2009 | wrongway
sipad does work we used it on one assy it had a very fine pitch part on it and at that time our dek 260 wasn't up to the task along with our 8 mil stencils. we had no problems with it it was sticky enough to hold the parts on thur all smt machines.
Electronics Forum | Mon Feb 20 17:56:46 EST 2006 | Chris
If you are running FR4 PCBs and not something exotic like Kapton flex circuits, I would go with the Dek 265 any day of the week. You will find that Dek supports the fully automatic printer much better than the semiautomatic printers like the 260, 24
Electronics Forum | Sat Jan 14 18:07:15 EST 2006 | Sona
I am looking for someone on the East Cost to service the following equipment. Electrovert EPK and DEK 260. We need to also add some convection heaters on the wave machine. We are located outside Philly, Pa If anyone can provide me with this info I a
Electronics Forum | Fri May 09 16:30:47 EDT 2008 | wrongway
we had a 1995 dek 260 in 2005 we bought a ekra X5 these two machines wre not alike at all but our ekra has been performing very well for us we run at least 2 shifts 5 days a week. have had to change couple of switches and tighten a belt and a new po
Electronics Forum | Mon Aug 18 10:42:04 EDT 2008 | floydf
We are in the process of preparing for a new board that requires paste in hole processing. The hole is a .020" via, and our customer wants it filled with solder, but not bulging past flush. For printers,we use a DEK 249 with a squeegee, and a DEK 260
Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Thu Jun 04 15:50:01 EDT 1998 | Brian Steelglove
My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My q
Electronics Forum | Fri Jun 05 12:57:20 EDT 1998 | Steve Schrader
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My
Electronics Forum | Thu Jun 04 16:01:57 EDT 1998 | BOB
| My company recently purchased 3 new Phillips CSM machines and is interested in buying a Screen Printer. The one problem we have is that we have to change setups three to four times a day. Due to the small runs of one type of boards that we do. My