Layer Count: 2L Board Thickness: 0.8mm Dimension: 140*85mm Material: Rogers RO5880 Surface Copper: 35μm Min Hole Diameter: 2.0mm Min line Width/Space: N/A Surface Finish: ENIG Do you need a PCB for special signal requirement into your products? High
TW-Single-sided PCB 0028 Price: Get Latest Price Minimum Order Quantity: 10 Unit/Units other Port: HK Packaging Details: blister and package Delivery Time: 1 week Payment Terms: L/C,D/P,T/T,Western Union Supply Ability: 5000000 Unit/Units pe
Technical Library | 2020-07-29 19:58:48.0
The majority of flexible circuits are made by patterning copper metal that is laminated to a flexible substrate, which is usually polyimide film of varying thickness. An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on Polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low cost LED lighting and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits. Aluminum is not easy to solder components to at low temperatures and PET cannot withstand high temperatures. Soldering to these materials requires either an additional surface treatment or the use of conductive epoxy to attach components. Surface treatment of aluminum includes the likes of Electroless Nickel Immersion Gold plating (ENIG), which is extensive wet-chemistry and cost-prohibitive for mass adoption. Conductive adhesives, including Anisotropic Conductive Paste (ACP), are another alternate to soldering components. These result in component substrate interfaces that are inferior to conventional solders in terms of performance and reliability. An advanced surface treatment technology will be presented that addresses all these constraints. Once applied on Aluminum surfaces using conventional printing techniques such as screen, stencil, etc., it is cured thermally in a convection oven at low temperatures. This surface treatment is non-conductive. To attach a component, a solder bump on the component or solder printed on the treated pad is needed before placing the component. The Aluminum circuit will pass through a reflow oven, as is commonly done in PCB manufacturing. This allows for the formation of a true metal to metal bond between the solder and the aluminum on the pads. This process paves the way for large scale, low cost manufacturing of Al-PET circuits. We will also discuss details of the process used to make functional aluminum circuits, study the resultant solder-aluminum bond, shear results and SEM/ EDS analysis.
Printed Circuit Boards FR4 1.6mm 94V0 Solar Panel Rigid PCB Quik Details: Product Name: Solar Panel Rigid PCB Base Material: FR4 Epoxy Resin Bare Board Size: 120mm x155mm Surface Finishing: Leaded HASL PCB Material Flamming rate: 94
New Equipment | Fabrication Services
8 Layers Printed Circuit Boards Manufacturing Multilayer PCB Fabrication Product Name: Multilayer PCB Board Material: FR4 Copper thickness 1 oz all layers Board Thickness: 1.6mm Special requirement Impendence Control Fab by Circuit Boar
New Equipment | Cleaning Agents
IONOX® FCR is a solvent blend designed for removing rosin, low solids and water soluble fluxes while being environmentally friendly. Easy to use, FCR is applied as received. A water rinse is required to remove all traces of soils and cleaner residues
Technical Library | 2020-10-27 02:07:31.0
For companies that choose to take the Pb-free exemption under the European Union's RoHS Directive and continue to manufacture tin-lead (Sn-Pb) electronic products, there is a growing concern about the lack of Sn-Pb ball grid array (BGA) components. Many companies are compelled to use the Pb-free Sn-Ag-Cu (SAC) BGA components in a Sn-Pb process, for which the assembly process and solder joint reliability have not yet been fully characterized. A careful experimental investigation was undertaken to evaluate the reliability of solder joints of SAC BGA components formed using Sn-Pb solder paste. This evaluation specifically looked at the impact of package size, solder ball volume, printed circuit board (PCB) surface finish, time above liquidus and peak temperature on reliability. Four different BGA package sizes (ranging from 8 to 45 mm2) were selected with ball-to-ball pitch size ranging from 0.5mm to 1.27mm. Two different PCB finishes were used: electroless nickel immersion gold (ENIG) and organic solderability preservative (OSP) on copper. Four different profiles were developed with the maximum peak temperatures of 210oC and 215oC and time above liquidus ranging from 60 to 120 seconds using Sn-Pb paste. One profile was generated for a lead-free control. A total of 60 boards were assembled. Some of the boards were subjected to an as assembled analysis while others were subjected to an accelerated thermal cycling (ATC) test in the temperature range of -40oC to 125oC for a maximum of 3500 cycles in accordance with IPC 9701A standard. Weibull plots were created and failure analysis performed. Analysis of as-assembled solder joints revealed that for a time above liquidus of 120 seconds and below, the degree of mixing between the BGA SAC ball alloy and the Sn-Pb solder paste was less than 100 percent for packages with a ball pitch of 0.8mm or greater. Depending on package size, the peak reflow temperature was observed to have a significant impact on the solder joint microstructural homogeneity. The influence of reflow process parameters on solder joint reliability was clearly manifested in the Weibull plots. This paper provides a discussion of the impact of various profiles' characteristics on the extent of mixing between SAC and Sn-Pb solder alloys and the associated thermal cyclic fatigue performance.
New Equipment | Assembly Services
China Double Sided Circuit Boards Fabricaiton and Assembly PCBA Turnkey Manufacturer 2 Layers circuit boards PCB FR4 1.6mm PCB fabrication and assembly 1oz PCB copper thickness Shenzhen PCB and PCBA manufacturer China turnkey contract electroni
Industry News | 2021-06-01 02:34:28.0
Tube Base Relays are relays suited for applications with the machine tool, pulp and paper, and transportation OEMs. Safety interlock switches are a means of safeguarding that monitors the position of a guard or gate. Temperature switch works just like typical electrical for on/off application.
