TM 150 series solderable conductive adhesives is rapid cure, self-filling, self-leveling and self-soldering adhesives which can be used as die attach adhesives for LED, CSP, QFP, and so on, to replace conductive adhesives (Ag) or solder materials suc
Technical Library | 2016-11-17 14:37:41.0
With increasing LED development and production, thermal issues are becoming more and more important for LED devices, particularly true for high power LED and also for other high power devices. In order to dissipate the heat from the device efficiently, Au80Sn20 alloy is being used in the industry now. However there are a few drawbacks for Au80Sn20 process: (1) higher soldering temperature, usually higher than 320°C; (2) low process yield; (3) too expensive. In order to overcome the shortcomings of Au80Sn20 process, YINCAE Advanced Materials, LLC has invented a new solderable adhesive – TM 230. Solderable adhesives are epoxy based silver adhesives. During the die attach reflow process, the solder material on silver can solder silver together, and die with pad together. After soldering, epoxy can encapsulate the soldered interface, so that the thermal conductivity can be as high as 58 W/mk. In comparison to Au80Sn20 reflow process, the solderable adhesive has the following advantages: (1) low process temperature – reflow peak temperature of 230°C; (2) high process yield – mass reflow process instead of thermal compression bonding process; (3) low cost ownership. In this paper we are going to present the die attach process of solderable adhesive and the reliability test. After 1000 h lighting of LED, it has been found that there is almost no decay in the light intensity by using solderable adhesive – TM 230.
Used SMT Equipment | X-Ray Inspection
Configuration Complete X·ray Protection Cabinet With Safety Interlocks 160 Kv Microfocus Demountable Open X-ray Tube Transmission Target (-500 Nanometer Resolution} True X-ray Intensity (Txi) Control 10 Watts Target Power Qty.6 -
Industry News | 2018-02-14 10:19:15.0
Press Release DA 90 Low Temperature Die Attach Adhesive Series Materials
Industry News | 2018-02-14 10:21:37.0
Press Release DA 150 High Temperature, Fast Cure Die Attach Adhesive Series Materials
Water-based, alkaline defluxing for semiconductor electronics HYDRON® SE 230A is a water-based, single-phase cleaning agent specifically developed for the use in dip tank processes. It removes flux residues from a wide range of semiconductor electro
Industry News | 2013-09-05 20:26:22.0
Engineered Material Systems , a leading global supplier of electronic materials for circuit assembly applications debuts its CA-195 High Thermal Conductivity, Low Cost Electrically Conductive LED Die Attach Adhesive for attaching LED and other small semiconductor die to silver and copper lead frames.
Industry Directory | Manufacturer's Representative
Specialty materials for SMT Assembly. Solder Paste, Spheres, Tac Fluxes, Flip Chip Fluxes, Solder wi
Industry Directory | Manufacturer
A materials supplier to the electronics industry. Our breadth of products includes Solder Paste, Solder Preforms, Stencils, Liquid Soldering Flux, Soldering Alloys, Cored Wire, Adhesives, Cleaners and Sinter Technologies
Industry News | 2013-04-29 12:50:23.0
Engineered Material Systems debuts its CA-105 Low-Cost Conductive LED Die Attach Adhesive for attaching LEDs and other small semiconductor die to silver and copper lead frames.
