Electronics Forum | Wed Jan 06 19:43:15 EST 1999 | Steve Gregory
Hey All you Einsteins out there!! I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket, (act
Electronics Forum | Mon Feb 23 23:50:18 EST 1998 | mike
| Does anyone have any experience with via in pad for | BGAs using conventional thru hole technology? | Steve Joy Steve, I had a customer who had designed a board to use a BGA socket. Well the socket did not work out so we then placed the bga dire
Electronics Forum | Thu Jul 15 08:03:36 EDT 1999 | Mark Quealy
| | I am trying to solder a 388 ball BGA to an Andon Electronics Corp. BGA socket adapter and I am having problems in the reflow of this part. I put no clean paste flux in the solder cups of the adapter then put the BGA part onto the adapter and run
Electronics Forum | Thu Feb 18 17:06:33 EST 1999 | Dave Jurena
| Hope some of you out there can help me with this one. | I am getting feedback from our test department that they are showing opens on solder joints which have visually good wetting. The touch-up operators confirm that the joint looks good. All they
Electronics Forum | Mon May 03 16:39:44 EDT 2010 | jlawson
Thanks Larry We are loooking a bigger Vapor > machine which could soldered our big size > borad(600x600 mm)assembled with hundreds of > sockets and thousands of components. How about > IBL products? Anyone used before? You should also look at
Electronics Forum | Mon Aug 31 16:23:37 EDT 1998 | Bill Boles
We have an unusual problem here and I'm reaching for more input if anyone can help??? We are an OEM manufacturer of PCA's. After a history of consistent quality designs, we have one small memory SIMM that is causing major headaches for us and our PCB
Electronics Forum | Thu Sep 03 12:36:11 EDT 1998 | davef
| We have an unusual problem here and I'm reaching for more input if anyone can help??? We are an OEM manufacturer of PCA's. After a history of consistent quality designs, we have one small memory SIMM that is causing major headaches for us and our P
Electronics Forum | Thu Jul 13 22:20:38 EDT 2000 | Dave F
=10 mils larger than lead 3 silk screen legend text weight >=10 mils 4 pads >=15 mils larger than finished hole sizes 5 place through hole components on 50 mil grid 6 no silk screen legend text over vias (if vias not solder masked) or holes 7 so
