Electronics Forum | Tue Sep 20 14:03:53 EDT 2011 | russw
We don't have the equipment to check specific gravity, we just assume what's on the bottle is correct and we've never had a problem. The stone sits in an open chamber, so there really isn't any pressure to check. When we vary the air flow, the foam
Electronics Forum | Wed Aug 29 12:12:14 EDT 2018 | solderingpro
What type of flux are you using today? - Obviously you have already outlined the difference in the parent materials and parent material preparation, so using the same program/profile will not work; the characteristics are different. Try increasing p
Electronics Forum | Wed May 31 10:23:13 EDT 2006 | aj
Hi All, What does one do if he meets the criteria above? Is there an exemption ? aj...
Electronics Forum | Mon Apr 26 15:52:11 EDT 2010 | markhoch
If the above recomendations do not help...(I'd try them first) Did you try the infamous "Fuji Fix"? Power the machine all the way down and power it back up. (Rebooting the software)
Electronics Forum | Tue Feb 21 06:49:41 EST 2017 | carlos350
Hello friends, I'm having a problem with a juki ke-750 when I connect it, I do not know the origin of it, but try to show it at the beginning, but then right away, it's the process that may be somebody please.
Electronics Forum | Mon Aug 01 19:43:08 EDT 2022 | emeto
I would assume it can do under some conditions. If you manually go and define pick up positions for all parts, may be there is not a good distance between two parts to pick at the same time. There also might be ON/OFF menu for this option.
Electronics Forum | Wed Apr 18 15:10:35 EDT 2012 | smtivan
Dear Colleagues! Our organization has a lot of not-intellectual feeders for Essemtec Pick&Place CSM7000, but we would like to use this feeders in Essemtec CSM7100. Does it possible? What will we need to do for normal work of CSM7100 with old feeders
Electronics Forum | Wed Sep 04 12:50:40 EDT 2019 | smrsteve
Thanks for that Steve - I'll try anything at the moment, but that sounds like a reasonable suggestion. I've already replaced a few cables that looked dodgy, and the LEDs on the LED rings, but I've not done a ribbon cable on the head yet. I shall hav
Electronics Forum | Wed Sep 04 13:40:46 EDT 2019 | smrsteve
Hello DWL, Thanks for the response. I've measured the components with a micrometer and set the sizes. Maximum tolerance on my machine is 20%, and that's what I'm using. If I do a manual scan, the measurements are exactly right (and what I've set up
Electronics Forum | Thu Sep 05 08:33:54 EDT 2019 | bobpan
Make sure your placement rotation co-ordinates are correct. If you do a function 3 it will show you. I think they should be in multiples of 6000....ex...6000 = 90 deg. Also check the z axis number. I dont think its cyber or vac related. It is somet