Electronics Forum | Fri Jul 30 17:26:27 EDT 2004 | cvega
The website for GPD Global is www.gpd-global.com
Electronics Forum | Fri Jul 30 17:57:46 EDT 2004 | pjc
www.asymtek.com www.creativedispensing.com these are two others
Electronics Forum | Tue Jul 23 11:06:00 EDT 2019 | majelacquinn
Currently trying to get away from using stencil printing. Looking for information on Micro-Dispensing and dot size using a Vermes MDV-3200A micro jet dispenser. I am using a Indium led free solder that has size 6 balls. With a 100 micron dispense hea
Electronics Forum | Fri Mar 27 12:58:27 EST 1998 | Jeff Bingel
We have a model 1818 that is a real work horse. It has been doing a great job. The only time we have trouble with it is when we have not PM the pump (about every two weeks running one shift). For more info e-mail me a bingelj@t-com.com | Can anyone
Electronics Forum | Thu Jul 22 23:49:53 EDT 2004 | Eric Dahilig
Any of you guys can recommend micro dot paste dispensing equipment capable of fine pitch (around 0.5mm) and 0.3mm pad size? I have a current project that needs the below requirement and we are trying on with the said process apart from the current s
Electronics Forum | Mon Mar 01 23:57:00 EST 1999 | Erhan Kaya
"DIP, VCD" -> "smt secondary" type of process flow. In that case, dispensing becomes a must. Dispensing needs less setup than printing, but takes longer. So, for a prototype manufacturer, dispensing becomes the best choice. Sometimes a machine dispe
Electronics Forum | Sun Jul 25 21:00:27 EDT 2004 | Eric
Thanks for the info. I have already talked with the guys from SIP (Speedline) for the inquiry about Camalot Dispenser. But I'm looking for other machines to benchmark so at least there would be a comparison.
Electronics Forum | Wed Oct 09 13:18:46 EDT 2019 | dwl
What is the advantage of dispensing dots over dispensing a line? I don't see any reason why dots wouldn't work. You might have to experiment a bit to dial in the right volume and spacing to get the desired end result, but it shouldn't be hard. Fisna
Electronics Forum | Fri Oct 26 13:29:03 EDT 2001 | Chris
I am looking for opinions on inline adhesive dispense equipment. I am considering Creative Automation, GPD, Asymtek, and Camalot. I will be dispensing dots of conductive adhesive about .010" in diameter. Thanks, Chris
Electronics Forum | Tue Oct 30 19:44:12 EST 2001 | davef
I haven�t read this, but maybe you can do a report for us. Look at: �Achieving Ultra-Fine Dot Solder Paste Dispensing� http://www.uic.com/wcms/WCMS.nsf/index/Material_Dispensing_0.html
.png)