Industry Directory | Consultant / Service Provider / Manufacturer
Eureka Dry Tech's IPC/JEDEC J-Std-033c Ultra Low Humidity Dry Cabinets provides moisture/humidity controlled storage of MSD，PCB, IC packages. Drying technology trusted by millions in replacing baking, nitrogen & desiccant packs.
Industry Directory | Consultant / Service Provider / Manufacturer / Other
Taiwan Dry Tech Corp. manufacturer of Eureka Dry Tech Fast Super Dryers for moisture/humidity proof protective storage of PCB, MSD, IC packages, meets IPC/JEDEC J-STD-033 & IPC-1601.
NC-2 is used to control the filling of dry air into the cabinet. So the desired relative humidity in the cabinet can be reached. For example, if 5%RH is the required condition, then the dry air will stop to fill while Fresh News We will participate
New Equipment | Board Handling - Storage
Eureka Dry Tech XDC-501 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs: http://www.eurekadrytech.com/fast-super-dryer/xdc-500 Capacity: 372 Liters Humidity Range: LESS THAN 5% Recovery Time: Recovers to ≤ 5% RH within 30 minutes after acces
Electronics Forum | Mon Jul 29 21:41:22 EDT 2002 | davef
Rite. Moisture, not N2, in the air is the issue.
Electronics Forum | Fri Dec 15 11:45:38 EST 2000 | DaveJ
All, Thanks for your quick response. However, my primary concern is not the question of solderability advantages of nitrogen versus air. With all things (zone temps, track speeds, flow rates, etc.) being equal, what would be the profile differences o
Used SMT Equipment | Other Equipment
Domnick Hunter MIDIGAS6-C Nitrogen Gas Generator Flow rate: 113 SCFH of 99.99% purity N2 delivered at 87 psig Includes: buffer vessel, oxygen analyzer & flow verification device Inlet air required: 13 scfm at 115 psig into the generator
.jpg)
Used SMT Equipment | Soldering - Selective
Inline ConveyorLead Free Solder Pot*OperationX/Y/Z Control Closed Loop Servo MotorsX/Y/Z Motion | Accuracy Lead Screw | ± .002"Interpolated Motion Yes | Simultaneous X, Y and ZMax Speed O X/Y axes 5” per secondMax Process Range12 x 18” | 300 x 450 mm
Industry News | 2014-09-18 17:55:32.0
SMTA China announcing that it presented awards for nine papers at the SMTA China South 2014 Conference Award Presentation Ceremony, held on Tuesday, August 26, 2014 at Shenzhen Convention & Exhibition Center in conjunction with the SMTA China Annual Award Ceremony.
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Technical Library | 2019-11-07 03:07:12.0
Many customers who have purchased the nitrogen cabinets have been in the mistaken belief that the air pipe can be pull down hard,so that it can cause the board to be damaged due to the hard pulling of the air pipe, which leads to the replacement of the penetrating board. Now, the following pictures are provided. Please note: Nitrogen cabinet is a optiomal choice for the microelectronics,semiconductor for humidity proof and anti-oxidation purpose,Climatest has put much efforts on the R&D of dry cabinets,as you know,our advangtage is to handle temperature and humidity,since early 1990s,our engineers began to test and research dry cabinet and nitrogen cabinet,all of our manufacturing process strictly follow ISO9001 standard,we supply to international customers for 20 years,if you are still looking for a reliable dry cabinet manufacturer to protect your MSD from moisture related damage,come to visit www.climatechambers.com,we are ready!
Technical Library | 2020-11-24 23:01:04.0
The miniaturization trend is driving industry to adopting low standoff components or components in cavity. The cost reduction pressure is pushing telecommunication industry to combine assembly of components and electromagnetic shield in one single reflow process. As a result, the flux outgassing/drying is getting very difficult for devices due to poor venting channel. This resulted in insufficiently dried/burnt-off flux residue. For a properly formulated flux, the remaining flux activity posed no issue in a dried flux residue for no-clean process. However, when venting channel is blocked, not only solvents remain, but also activators could not be burnt off. The presence of solvents allows mobility of active ingredients and the associated corrosion, thus poses a major threat to the reliability. In this work, a new halogen-free no-clean SnAgCu solder paste, 33-76-1, has been developed. This solder paste exhibited SIR value above the IPC spec 100 MΩ without any dendrite formation, even with a wet flux residue on the comb pattern. The wet flux residue was caused by covering the comb pattern with 10 mm × 10 mm glass slide during reflow and SIR testing in order to mimic the poorly vented low standoff components. The paste 33-76-1 also showed very good SMT assembly performance, including voiding of QFN and HIP resistance. The wetting ability of paste 33-76-1 was very good under nitrogen. For air reflow, 33-76-1 still matched paste C which is widely accepted by industry for air reflow process. The above good performance on both non-corrosivity with wet flux residue and robust SMT process can only be accomplished through a breakthrough in flux technology.
| https://pcbasupplies.com/blogdry-cabinet-representation-in-florida-the-caribbean/
. TRC will represent the complete line of humidity-controlled storage dry cabinets. XDry has been providing self-contained and easy to maintain storage cabinets for more than 15 years and there is no need for nitrogen or compressed air
| http://etasmt.com:9060/te_news_industry/2013-04-20/3962.chtml
(200) Hot Air Reflow Soldering Oven A600 (221) Nitrogen Dual-rail SMD Oven Lyra733 (673) Lead free LED SMT Reflow Oven Lyra733 (1444) Automatic Industrial SMT Reflow Oven
winsouce.jpg)
