Electronics Forum | Tue Mar 02 17:41:04 EST 2021 | astarotf
The heads in the middle of production stop and this error appears. We already checked the readers, linear encoders and changed the UIMC cards and found no errors, apparently all these revised parts are working. Can anyone help us where else can we c
Electronics Forum | Wed Mar 03 14:25:02 EST 2021 | astarotf
Hi Spoiltforchoice Thanks for the comment. With the line encoder readers that the machine brings, we performed a positioning reading check, which showed us the increase or decrease in the path that the heads make, with which we conclude that it is re
Electronics Forum | Wed Mar 03 10:14:45 EST 2021 | spoiltforchoice
I don't have one of these machines, but what kind of checks are you able to do on the linear encoders? On our Essemtec there is a dedicated diagnostic utility that gives you a plot of the encoder readout showing both the raw readout as a sort of roun
Electronics Forum | Mon Jan 29 15:21:56 EST 2007 | flipit
If you teach your feeders, you can no longer gang pick correct? I have never had a dual beam or dual head GSM before. However, if you teach feeders with the fiducial camera and your picks are still off, there is an offset in one or several spindles
Electronics Forum | Mon May 02 23:26:12 EDT 2016 | ttheis
Is this a dual-beam GSM2? Check to make sure the machine configuration is correct for the machine, otherwise I would look at encoders for the axis and electrical connections.
Electronics Forum | Thu Aug 19 20:20:16 EDT 2021 | astarotf
Does anyone know why the heads of the GSM2 dual beam 4688 sound like this? When it is in x position the motor begins to vibrate
Electronics Forum | Thu Oct 20 19:13:21 EDT 2011 | eadthem
When you get in to a 30 spindle lightning head or the dual and single beam 7 spindle flexjets from UIC, there generally really solid machines. The only flakeyness we have is with a GC120 (4 beams in 1 box). and of that most of the issues are purely b
Electronics Forum | Sat Aug 06 13:39:48 EDT 2022 | ttheis
Yes, the 760 is single head single beam, dual spindle.
Electronics Forum | Tue Jun 28 13:32:35 EDT 2011 | jax
I started with Dual Beam, 7 spindle, Genesis machines. (first in 2003) - Still runs good Speed was not my main concern... Odd Form, Tall components were. I added High Speed with the Lightning Head machines. (first in 2005) - Still runs Good I am not
Electronics Forum | Wed May 02 12:22:30 EDT 2007 | SWAG
Make sure you get a good upward looking camera combo. 4.0 on rear and 2.6 for PTF (platform tray feeder) parts is my favorite. Easy to wrench on, calibrate (if you have a cal. kit), and easy to program. Single beam will run at 2000+ cph and dual b