Electronics Forum | Wed May 19 15:23:07 EDT 1999 | Justin Medernach
Hi All, I'm getting an Electrovert Wave. It's the replacement for the Econopak. I can't remember the name. Either way, the spray fluxer is made by USI. Does anyone have experience with this spray fluxer. Good or bad would be appreciated. Thanks
Electronics Forum | Mon Dec 28 08:46:25 EST 1998 | John
Last week we soldered our first defect free surface mount prototype. We installed a rotary chip wave on our Econopak, and those things work great! Thanks to all for your input(Chrys,Pete, etc....). Hope all of you had a great Christmas, and best
Electronics Forum | Mon Dec 12 13:34:15 EST 2005 | jbrower
Hi Frank I use an electrovert econopak and am very pleased with it. Electrovert offers a leadfree upgrade to the pot but it is a might bit expensive. Contact them for pricing. In my machine I am going with SN100 distributed by AIM. It might be some
Electronics Forum | Wed Dec 21 06:51:48 EST 2005 | aj
Hi all, I have an Electrovert Econopak Plus wave solder machine. Lately the solder pot temp has been fluctuating +/-10 degrees c. I have replaced the thermocouple as I suspected it to be faulty but the problem still exists. I am confident that the
Electronics Forum | Mon May 15 08:53:52 EDT 2006 | aj
Hi All, Due to carry out the Bath Changeover this weekend. I have an Electrovert Econopak- 550 kg bath. We are not replacing our internal components i.e nozzles/pumps etc. until we really have to. Has anyine carried out there changeover yet and ha
Electronics Forum | Tue Mar 11 11:52:06 EDT 2008 | edmneb
Anyone know of a place to get a replacement pot for an Electrovert Econopak II SMT? Preferably a titanium pot? We currently have a machine that is running SN100C and it seems to be developing some pitting in the metal of the pot. We would like to
Electronics Forum | Wed Jul 10 22:13:45 EDT 2019 | SMTA-Ray
I don't recall if the heater wattage is the same or not for the different pots. If the wattage is different then the PID algorithm is also different. this anticipated when & by how much the heater will overshoot its setpoint and turns the heater off
Electronics Forum | Tue May 02 17:11:17 EDT 2000 | John
My company just purchased a Vecta (E-vert) wave soldering machine. Bridging has become a serious issue, both on SMT components and thru hole. We are currently seeing about 500 ppm. The products that are being run now were run previously on our old
Electronics Forum | Wed May 03 09:50:50 EDT 2000 | C.K.
Which wave solder flux are you using and what types of preheaters did you have on both your old econopak and your new vectra? From my past experience, an alcohol-based flux does NOT work well with Convection style preheaters....the flux burned off t
Electronics Forum | Fri Jan 24 09:26:29 EST 2003 | pjc
I sent you a couple of charts to assist with your troubleshooting. One is the Electrovert Wave Solder Troubleshooting chart and the other is Sandia Labs/Electrovert Optimum Solder Contact Time. Electrovert has a 6 deg. conveyor angle standard on the