Electronics Forum | Fri Feb 16 14:14:07 EST 2007 | wrongway
we use A EKRA X5 it can use A pad our the fiducial I generaly use A pab becuse most of our stencil don't come with the fiducials on them and our boards our HASAL and the fids our domed most of the time the smt pads work better for me
Electronics Forum | Thu Aug 11 15:10:27 EDT 2011 | wrongway
Hello 1036 we have a Ekra X5 machine the parts might be in Germany but the tech support is some of the best i have delt with we have been using it 2 shifts 5 days a week for 6 years now we have had a few issues but nothing that I would'nt expect goo
Electronics Forum | Fri May 20 12:14:25 EDT 2016 | strandy89
Im having trouble with and Ekra x5 machine. It works fine when up being run constantly, but if it sits for 10-15 minutes when you try to move the Y table to the front of the machine it makes a loud sound as if the table is hitting/catching on somethi
Electronics Forum | Mon Mar 04 07:44:57 EST 2019 | vrasak
Hello, My EKRA X5 printer does not clamp the PCB. I would like to the manual any E4, E5 or X5. Hope hopefully it should give me some clue. Could you please send me the manual E4, E5 or X5? vrasak@cncroom.com Thank you so much, Weerasak.
Electronics Forum | Wed Aug 05 08:57:23 EDT 2020 | oxygensmd
Snap off is an option to make distance between PCB and stencil. If the distance not enought, adjust the PCB thickness too. Mostly we don't use snap off, I more prefer if the stencil is tight with the PCB - I know, this make the stencil lifetime worst
Electronics Forum | Thu Aug 06 05:29:25 EDT 2020 | bangir
Hi Chris, Thank you for your advise. We got problem on key in parameters. Why we can't save value on parameter after key in manually? When we key in Parameter, we used password 9060. Is there any other password to key in and save machine parameter? T
Electronics Forum | Mon Mar 14 20:05:30 EDT 2022 | cbeneat
We are still running an EKRA X5. 2008 build. 1,366,000 cycles. Being swapped out in the near future with an X5 Pro. But we're going to hold it for emergencies. We've found the older X5's are pretty bullet proof. Just keep up on the maintenance.
Electronics Forum | Wed Sep 06 11:08:09 EDT 2006 | Shep
I'm using an EKRA X5 printer. My QC department has been rejecting boards for "fibers" in solder joints. After investigation, I have determined that the fibers are coming from the stencil cleaner paper. I'm using JNJ Industries p/n 5404EK paper. A
Electronics Forum | Fri May 09 16:30:47 EDT 2008 | wrongway
we had a 1995 dek 260 in 2005 we bought a ekra X5 these two machines wre not alike at all but our ekra has been performing very well for us we run at least 2 shifts 5 days a week. have had to change couple of switches and tighten a belt and a new po
Electronics Forum | Tue Jun 10 18:48:42 EDT 2008 | mefloump
We run 2 lines: Line 1 has a Dek 265, GL5, CP43, QP242E, and Heller 1900W; Line 2 has an Ekra X4, GL541, CP643E, QP242E, and BTU VIP98N oven. Soon both lines will have new Ekra X5 screen printers and the BTU replaced with another Heller. Works for us
