Electronics Forum | Thu Mar 25 13:52:36 EDT 2021 | ephan
I bought this printer from a third-party source. The machine was running well until one day when we tried to turn it on and the screen just came up blank (I already checked if it was a monitor problem). Does anyone know why this happened and how to f
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c
Electronics Forum | Mon Feb 24 12:14:07 EST 2003 | gilligan
We use an EKRA E4 printer, but the concept sounds the same as far as the fiducial alignment goes. I have found that SOT-23 components work the best for fiducials - and I always make it a point to use them on our older PCB's (where the screens do not
Electronics Forum | Tue Mar 15 19:17:26 EST 2005 | yoman
Thanks for your reply. We are using EKRA E4 Inline Automatic Stencil Printer. It is Capable of Automatic stencil inspection. 2D solder coverage inspection. Fix Squeegee angle at 45 degees angle. Programmable squeegee speeds and pressure, boards snap
Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef
Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0
Electronics Forum | Wed May 25 10:51:35 EDT 2022 | oxygensmd
We are using EKRA E5 and X5. Both of them are rock-solid and easy-to-use machines. Software of these EKRAs are really user-friendly. If you make the yearly maintenance and preventive maintenance they will work for years. I know a factory where are ar
Electronics Forum | Mon Jul 28 11:34:47 EDT 2014 | oxygensmd
Hi Everybody, I have an Ekra E5 and I have two problems. - Anybody have english operator/service manual to this machine? - I have problems with understencil cleaner dispenser. If I start to flow the stencil cleaner then the dispenser doen't move o
Electronics Forum | Wed Jul 20 14:37:40 EDT 2016 | bpoydence
I started a new job about 6 months ago, and the screen printer is an Ekra E4. I have never used one before, but have used a variety of them and I have 13 years experience mainly in surface mount. I cannot seem to get consistency out of this machine
Electronics Forum | Tue May 08 12:57:30 EDT 2001 | Morris
I've seen these used & they work quite well. The fiberglass scratch brush. http://contacteast.com/product/prodpage.cfm?grp=4F7A9B48-C870-11D4-8A700050DA5FEB55&sid=FC52FB8C-A662-46E4-B3CBDAD625F7B085 You will want to train the operators to use some
Electronics Forum | Wed Sep 06 11:08:09 EDT 2006 | Shep
I'm using an EKRA X5 printer. My QC department has been rejecting boards for "fibers" in solder joints. After investigation, I have determined that the fibers are coming from the stencil cleaner paper. I'm using JNJ Industries p/n 5404EK paper. A