Parts & Supplies | Other Equipment
CAA1 CAA1M CAA1M-60 CAA1M-70 CAA1M-80 CABLE 3X2C9-2 5M CASE,ASSY,FRONT (A) E5AS CASE,ASSY,FRONT (AH) E5AS-H CASE,ASSY,FRONT (B) E5BS CASE,ASSY,FRONT (BH) E5BS-H CASE,ASSY,FRONT (X) E5CS-X CASE,ASSY,FRONT (XA) E5CS-XA CASE,ASSY,REAR (A) E5
Parts & Supplies | SMT Equipment
If you are interested,please contact: Email: bunny@goodlucksmt.com Skype: bunnysmt Online shop: http://www.aliexpress.com/store/1398568 website: www.goodlucksmt.com www.smtsupplier.com FUJI IP3 of the board conv
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Wed Nov 23 11:07:56 EST 2016 | uski74
Hi, I'm looking for user and service manuals for EKRA E4 and E5 machines.My e-mail is: uski7474@gmail.com. Any input will be appreciated. Thanks in advance. Vladimir
Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef
Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0
Electronics Forum | Mon Mar 04 07:44:57 EST 2019 | vrasak
Hello, My EKRA X5 printer does not clamp the PCB. I would like to the manual any E4, E5 or X5. Hope hopefully it should give me some clue. Could you please send me the manual E4, E5 or X5? vrasak@cncroom.com Thank you so much, Weerasak.
Electronics Forum | Thu Aug 24 23:25:42 EDT 2017 | micropak
I have an E5 and I believe this is in service mode /machine configuration.
