Technical Library | 2023-01-17 17:37:45.0
Various international market trends drive electronics manufacturers and their mate- rials and equipment suppliers to develop new assembly techniques to reduce the industry's environmental impact. Two pri- mary forces in this drive are the movements to lead-free assembly and ISO 14000 cer- tification. In response to these factors, reflow technology advances are enabling manufacturers to meet or anticipate the new environmental mandates.
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Industry Directory | Manufacturer
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Technical Library | 2023-01-17 17:35:07.0
After years of concentration on resolving productivity- related concerns such as increasing speed, consistency and throughput while reducing costs, many of the world's leading electronics manufacturers have added a new mandate to their agendas. They are seeking to minimize the environmental impacts of their assembly processes and final products without sacrificing the high levels of productivity and quality that have been achieved through decades of effort.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Industry News | 2014-04-11 12:49:57.0
Heller Industries was announced the winner of the Circuits Assembly 2014 Service Excellence Award in the category of Reflow Soldering Companies.
Industry News | 2023-10-18 17:43:18.0
HELLER's High UPH Vacuum Reflow Oven clinched the coveted "Step-by-Step Excellence Awards" - Innovation Award owing to its industry-leading product strength and outstanding performance.
Industry News | 2023-06-12 21:13:08.0
HELLER joined the 97th CEIA China Electronics Intelligent Manufacturing Summit Forum convened in Wuhan, garnering substantial attention from industry insiders. The conference concentrated on a wide array of fields, including optoelectronic communication, military electronics, and EV automotive electronics. With an impressive turnout of nearly 500 industry colleagues, the event proved to be an invaluable platform for networking and knowledge exchange.
Industry News | 2007-11-01 20:00:20.0
October 31, 2007, Florham Park, New Jersey � In continuation with its overall growth strategy, Heller Industries is pleased to announce the appointment of Mr. Wojtek Antoniak as Regional Sales Manager, Southeast Asia. Mr. Antoniak will be based in Singapore and will be responsible for sales management throughout Malaysia, Thailand, Vietnam as well as Singapore and the Philippines.
Industry News | 2014-09-06 19:18:17.0
Briefing Co-hosted by IPC as Part of Continuing Effort to Connect IPC Members with Policymakers.
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
.gif)
.gif)
