.jpg)
Layer Count: 8L Board Thickness: 1.0mm Panel Dimension:190*86mm/2up Material: S1141 Copper on board surface: 35μm Min Hole Diameter: 0.1mm Min line Width/Space: 8/8mil Surface Finish: ENIG+Selective OSP in BGA area This quick turn PCB is manufacture
Layer Count: 2L Board Thickness: 0.8mm Dimension: 140*85mm Material: Rogers RO5880 Surface Copper: 35μm Min Hole Diameter: 2.0mm Min line Width/Space: N/A Surface Finish: ENIG Do you need a PCB for special signal requirement into your products? High
Electronics Forum | Mon May 14 17:12:20 EDT 2001 | davef
Continuing along the path that Brian took ... IPC-7525 gives design guideline for stepped stencils. It goes something like: * Stepped area SB GT 25 thou from pads located on the greatest thickness of the stencil * Pads in stepped area SB GT 35 tho
Electronics Forum | Wed May 03 22:14:29 EDT 2006 | davef
We think well done carbon ink and well done ENIG are equally reliable [maybe 1M operations]. If the gold is pourous [not all that an uncommon], ENIG is far less reliable than carbon ink.
Industry News | 2018-10-18 10:16:53.0
Solder Tinned Pads vs Gold Plated Pads - The Importance of Selecting the Proper Surface Finish
Industry News | 2024-11-18 19:03:05.0
Stand J90
Evaluation of Laminates in Pb-free HASL Process and Pb-free Assembly Environment SMTnet Express September 20, 2012, Subscribers: 25503, Members: Companies: 8989, Users: 33687 Evaluation of Laminates in Pb-free HASL Process and Pb-free Assembly
40731 | https://www.smta.org/smtai/SMTAI-2019-Technical-Program.pdf?v=200609010628
Surface Mount Technology Association (SMTA)
Imagineering, Inc. | https://www.pcbnet.com/blog/the-role-of-pcb-assembly-and-fabrication-in-the-aerospace-industry/
with immersion gold coating (ENIG) and immersion silver. Hot air solder leveling (HASL) is a type of PCB finish that involves dipping the PCB into molten solder, which covers exposed copper surfaces. The PCB is then passed between hot air knives to
.gif)
