New Equipment | Solder Paste Stencils
Simplify and Speed Up QFN and LGA device rework. StencilMate™ leadless device rework stencils make the process of reworking leadless devices such as QFNs and LGAs simple and fast. These adhesive-backed poyimide stencils are placed on to the bottom o
Lite Fast 2081, a UV encapsulant, was specifically developed to relieve the stress placed on toroidal coils or electronic components that will experience pressure during the molding process. With a durometer Shore D hardness of 5, the UV encapsulant
Electronics Forum | Wed Feb 05 15:16:15 EST 2003 | davef
If the voiding is not related to entrapped air in your vias, consider trying a different paste.
Electronics Forum | Tue May 11 14:17:55 EDT 2010 | isd_jwendell
Getting the paste from the jar and into the cartridge without entrapping air can be difficult. Can you not just transfer the 500g jar into smaller working jars? This way you can keep the bulk of your paste refrigerated until needed. Air is not your f
Industry News | 2017-06-14 10:46:29.0
GPD Global offers uniquely designed 2-part mixing pump to accurately mix and dispense two-part components while eliminating entrapped air.
Industry News | 2017-10-02 13:58:42.0
GPD Global will exhibit at the upcoming IMAPS 2017. At booth 244, GPD Global will exhibit a complete line of Fluid Dispensing pumps with the latest dispense technologies for integration or retrofit. Whether your process requires low or high viscosity fluids, thick pastes, or abrasive media, there is a dispense pump to meet your requirements.
Technical Library | 2021-08-11 00:52:35.0
Formulators of multi-component adhesives, potting and encapsulation materials are careful not to supply products with entrapped air. They do this by manufacturing under vacuum or degassing them before supplying to the end user. Consequently, entrapped air in a mixed material is usually a processing issue.
Technical Library | 2021-12-31 06:55:24.0
Any air entrapment in the potting compound can result in air bubbles that may cause performance problems in the finished component. Potting under vacuum is therefore frequently required to prevent air entrapment, especially with the increasingly small and complex assemblies required in today's electronics
GPD Global | https://www.gpd-global.com/co_website/dispense-retrofit-imaps.php
. Also, ask about our Volumetric 2-Part Mixing Pump that accurately mixes and dispenses two-part components while eliminating entrapped air
.gif)
.gif)
