Electronics Forum | Thu Jun 06 10:05:57 EDT 2013 | azhiker
OK guys, we got our Adipic acid. What is the preferred methode of applying it? a) Nozzle mounted, momentarily turn off wave and then brush? Or b)coat nozzle with the acid then mount it and turn wave on? By the way, we are using Indium flux WF-994
Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler
We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs
Electronics Forum | Fri Jul 07 16:04:42 EDT 2000 | DONALD
We have an Ersa selective soldering machine here. We use the wire solder with the automatic feed. We dross and clean the pot roughly once a week. You can tell when it needs it by looking at the solder fountain. We do the nozzle at the same time. We c
Electronics Forum | Thu Apr 25 22:41:24 EDT 2013 | jaimebc
Evtimov, thanks for your reply. Yesterday was our first day of running 99.999%. We were running for weeks with 99.99% Nitrogen purity and we just were having all kinds of problems with the miniwave not being consistent. We had a wave offsets at 75,
Electronics Forum | Thu Apr 25 22:42:06 EDT 2013 | jaimebc
Evtimov, thanks for your reply. Yesterday was our first day of running 99.999%. We were running for weeks with 99.99% Nitrogen purity and we just were having all kinds of problems with the miniwave not being consistent. We had a wave offsets at 75,
Electronics Forum | Thu Jan 06 21:41:20 EST 2005 | James Khor
You can using Ersa IR550A Rework System. The unit was NOT using any hot air process. IR550A Rework System is worldwide the only system with a genuine closed loop control system. Which employs the current temperature at the component in order to regul
Electronics Forum | Wed Oct 01 13:19:18 EDT 2008 | evtimov
I am also doing research on rework machines. for now I saw : Ersa - german http://www.ersa.de/en/produkte/smt_bga_rework/frame_smt_bga_rework.html DenOn- Japanese http://www.denondic.co.jp/en/products/rd500_2.html, Metcal http://www.metcal.com A
Electronics Forum | Thu Sep 01 02:47:01 EDT 2005 | stalkerb
Thanks Cmiller & PR, I am warmed to hear others are doing this sort of thing.......like all inovative ideas, you often stumble into them. As far as im aware the ERSA dual Pot is the only machine avaiable on the market that can do this sort of thing
Electronics Forum | Wed May 03 11:51:37 EDT 2006 | samir
Chunks, We have custom nozzles here in Riyadh that are designed to solder through-hole with SMT 0805 R's and C's just 0.5mm away. ERSA charged an arm and a leg for these, so I buy them from my toolmaker, Asadulah , for half the price. They come in
Electronics Forum | Thu Apr 20 02:17:15 EDT 2017 | cromaclear
Hello to all, I am having a serious problem on my ersa versaflow 3 machine. This is a selective soldering machine and a problem is in less soldering material on the pins, you can see it in the picture http://imgur.com/a/FC2a1 Do you have any idea how