Electronics Forum | Fri May 05 05:51:44 EDT 2000 | Joe
Thanks for the info. Our system is capable of holding the set limits, but since breakdowns do happen I am considering what to do. So while everything is running, we have a climatic controlled area. The min. relative humidity of 40% comes from the JE
Electronics Forum | Mon May 30 09:11:15 EDT 2011 | davef
3a ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity lim
Electronics Forum | Mon May 06 21:40:40 EDT 2013 | davef
ANSI/J-STD-001: * Temperature and Humidity: 18-30°C, 30-70%RH ** If out of range, shall verify electrostatic discharge control program according to ANSI/ESD S20-20 is adequate. ** For process control, more restrictive temperature and humidity limits
Electronics Forum | Wed May 03 20:04:21 EDT 2000 | Dave F
Joe: Hey, just hose everyone down with water when your humidity starts to decrease to below 40%. ;-) Actually, that�s how some humidity controllers work, when added to your heating system. Well basically that�s how they work. I�m not tryin� to
Electronics Forum | Tue Jan 16 21:27:56 EST 2001 | davef
No we do not use such a storage unit. We say our preferred environment is within: * 30%RH / 84�F * 30%RH / 72�F * 70%RH / 78�F * 70%RH / 68�F J-001C says [words to the effect of]: * At 30%RH and below you�d better make sure your ESD control program
Electronics Forum | Mon Feb 10 21:19:51 EST 2003 | MA/NY DDave
Hi I am in favor of the best money can buy tiles, and everything including an ESD officier and training for everyone. Long term less money is spent and ESD protection is kept high continually. Boy do I have stories like the cleaning guys who put on
Electronics Forum | Tue May 16 20:59:46 EDT 2000 | Dave F
Ashok: Haven't unloaded that ESD Coordinator job yet have you? Smocks: Don't work, they're hot, and no one likes them, but they put up with them (sort of). Now if they knew they didn't work, all the customer PR in the world wouldn't help. The bi
Electronics Forum | Thu Aug 30 17:59:29 EDT 2012 | rway
It should also be noted that if you can control your humidity, you can reduce the chance of static build-up. Do you monitor the humidity in your facility? This alone, can be the greatest contributor to static build-up and ESD damage. But back to t
Electronics Forum | Wed Sep 20 16:15:53 EDT 2017 | davef
Some requirements to consider are: * Humidity and temperature controlled according to J-STD-001 * Electro-static discharge (ESD) control program according to ANSI/ESD-S-20.20. * Soldering technicians are trained and certified according to J-STD-0
Electronics Forum | Thu Mar 08 22:35:13 EST 2007 | davef
Suggestions are: * Procure solderable finishes that have sufficient thickness to avoid intermetallic problems and use storage conditions that do not promote oxide growth problems. * Bagging/sealing boards has been shown to extend storage durations i
