Electronics Forum | Mon Nov 02 07:32:44 EST 2009 | umar
Hi..., We have build the PCBA base on IPC 610 and J-std-001 class 3 product, All the ESD pre caution been implement at my production side, ESD flooring, wear the ESD smock, wear the ESD shoe, use the finger coat and those not use the finger coat the
Electronics Forum | Wed Apr 12 21:04:10 EDT 2000 | Dave F
Ashok: You still didn�t tell me why you want additional drying of your boards, but what the hey, we all have our dark secrets. Anywho, let�s consider some options for reducing the moisture of your cleaned boards: OPTION 1 - Up-Grading Your Cleaner
Electronics Forum | Wed Jan 22 14:25:17 EST 2014 | rgduval
In the purest sense of ESD control, we would have to say yes, use ESD tape to cover the gold fingers. The gold fingers are connected directly to input/output controls for the card, and, as we all know, when handling boards, we're supposed to avoid c
Electronics Forum | Fri Aug 08 18:06:35 EDT 2003 | davef
Antistat sprays are a waste of time and money. These sprays just soaps disolved in water that absorb moisture from the air. Your minimum requirements: Conductive floor mats and wrist straps that are properly grounded. From there, consider using
Electronics Forum | Wed Jul 08 14:13:51 EDT 2009 | stepheniii
Actually that reminds me I remember one place I visited that wore two heel straps for saftey purposes. The reasoning was that if you touched a live wire with one hand and only had the heel strap on the other foot the current would go through your he
Electronics Forum | Wed Jul 08 06:02:59 EDT 2009 | stepheniii
Advertisements are not always 100% accurate on technical issues. You don't want instand static discharge. A wrist strap with no resistor could cause that. Therefore put in a current limiting resistor to make the charge dissipate slowly. Does anyone
Electronics Forum | Thu Aug 30 13:26:40 EDT 2012 | joeherz
Appreciate all the replies. We have a good system in place with ESD tile floor, grounded systems/benches/etc and heel and wrist strap usage and monitoring. Good training program as well. We've recently upgraded to the 2007 version of the ANSI 20.2
Electronics Forum | Wed Jul 13 15:14:48 EDT 2005 | jdumont
...Or how about the wireless wrist straps. Those are a lifesaver. Ok im done now.
Electronics Forum | Wed Oct 17 14:52:25 EDT 2012 | rway
1) Is there something your design/pcb Engineer can do to lay the array out a little better for the wave (i.e. add substrates, board thickness)? 2)What do you mean by material movement? Single piece/continuous flow. 3) Shouldn't be too hard. You
Electronics Forum | Tue Jul 09 00:06:34 EDT 2002 | kenbliss
One thing that is a constant in the electronics assembly world is change. What ever you setup now be sure to think about what might change in the not to distant future. My experience says that you want ESD flooring, although cost of course is a nec
