Electronics Forum | Wed Feb 23 08:27:14 EST 2011 | cyber_wolf
I am going to disagree with that. Our QP242 wasn't worth a crap when it came to reliably placing BGA's. The lighting parameters and the programming will have you tearing your hair out. If you are doing outline recognition on small BGA's...then maybe.
Electronics Forum | Tue Mar 11 16:24:12 EDT 2014 | sumote
Does anyone have a copy of the feeder repair/maintenance for the CP6 and IP3 feeders? I need the ones that have exploded views with part numbers. I have had them in a previous life so I know they exist. If someone has a pdf file they could sen
Electronics Forum | Wed Mar 19 12:36:04 EDT 2014 | joeherz
We have an application where an assembly has to be residue (flux) free except for 2 SMT non washable parts. Currently those parts are post wash hand adds but the product volume is exploding. We want to run those parts in SMT, mask them using an aut
Electronics Forum | Fri Mar 23 03:18:08 EDT 2018 | bukas
hello Diego, I would start by opening oven and looking for missing components. once you locate them you can work from there. are you using any alu caps on your board? I had problem with bad alu caps exploding in oven and scattering other components.
Electronics Forum | Wed Feb 07 21:56:00 EST 2001 | davef
Every critter out there with large incisors adapted for gnawing and nibbling has a different theory of solder ball formation. [My theory: It�s punishment for using NC fluxes. Stand and deliver. My solder balls end-up in the gross filter connected
Electronics Forum | Tue Aug 18 12:02:59 EDT 1998 | zambri
| Hi, | Need some advice on how to eliminate or reduce the solder on finger that we are having right now. So far what we understand is that 90% of the problem is due to the reflow process where solder traps in vias causing explosion when subj
Electronics Forum | Mon Jul 27 21:10:10 EDT 1998 | D.Lange
| Hi, | Need some advice on how to eliminate or reduce the solder on finger that we are having right now. So far what we understand is that 90% of the problem is due to the reflow process where solder traps in vias causing explosion when subj
Electronics Forum | Mon Aug 09 16:37:14 EDT 1999 | John Thorup
| Just curious what effect pinholes and solder voids can have on solder joints that have high current passing thru them. Also could moisture from steam sterilization (autoclaving) get inside a said solder joint and then outgas during high current, an
Electronics Forum | Fri Jun 09 12:35:00 EDT 2006 | G. eisner
We are finding this diode not reflowing well. We are having tombstoning issues with this part and only this part on different pcbs. The main thing we find is that under a scope there is blow outs as in air bubbles that look like they have exploded. I
Electronics Forum | Mon Jun 25 16:04:50 EDT 2007 | jmelson
Hi Jon, > > Thanks for the dimensions. It is quite > larger than CSM66, so I haven't got chance to buy > 84. You are very "lucky" because you "only" had > to cut a bigger hole for it. My workshop is > "under" the ground, in the cellar,so I had t