Electronics Forum | Wed Apr 03 13:32:30 EST 2002 | Bob
Hi, Just to ease your mind a little. I have 15 years experiance on Fuji kit, and was the engineer in charge of over 30 CP6's. They are very robust and the electrical / electronic side is pretty bomb proof. The main thing to look out for is wear in
Electronics Forum | Fri Dec 21 00:06:55 EST 2007 | nhantruong
If you want to use fuji CP6 machine, you have to buy the the fuji flexa software.Because the old software from fuji (MCS or F4G) they are not support anymore. In the flexa software you can make top and bottom side in the same program, you can move th
Electronics Forum | Mon Nov 22 14:44:57 EST 2010 | rodrigo
I replied on the weekend but now I'm at work and I can clearly see what you mean. The Part Name is the footprint for the part and it is common for a lot of feeders which is obviously wrong. I think I need to make new part numbers for the footprints s
Electronics Forum | Thu Apr 04 12:52:48 EDT 2019 | rodrigo
Hi, Our MCS30 had a bad backup battery in one of the boards. After changing the battery I got the all boot devices failed error. I managed to get a hold of some boot floppy disks and I can use disk1 to boot the MCS30 to a "$" prompt. I also have a di
Electronics Forum | Fri Oct 01 00:44:41 EDT 1999 | Hon Choi
If permanent set processing is used, designate the permanent set table name (PST). The Separator uses the PST to restrict the allocation of specified parts to certain feeder positions on the unit (device) table. The PST is mainly used for efficiency
Electronics Forum | Tue Aug 31 19:44:25 EDT 1999 | dean
| Do any SMTneters out there have a good solution to substitute SMT parts that you are willing to share? I presume all of us have the issue where purchasing wants to buy "the same part" from a different vendor. While the part may be the same electric
Electronics Forum | Wed Sep 16 01:29:38 EDT 1998 | Mike C
| | | FujiCam users | | I am looking for any feedback concerning Fujicam. | | User friendly? | | Any Bugs? | | Any input would be nice | | Mike | Mike, | While I don't have any experience with Fujicam, I do have a lot of experience with PanaPRO fr
Electronics Forum | Fri Jun 26 13:52:05 EDT 1998 | jcc
| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys
Electronics Forum | Tue Jun 09 00:31:56 EDT 1998 | Dave McDermid
| We are currently comparing the Fuji QP2 machine to the Universal GSM. The primary use will be for QFP's down to .4 mm pitch and for 300+I/O BGAs. My initial input has been that you spend alot of time tweeking PD's on the QP because the vision sys
Electronics Forum | Sat Jan 20 23:48:55 EST 2007 | bvdb
Hi Al, Thanks for the suggestion. Yes, I should have said that the cable has been checked and another cable tested with the same results. In addition to the three wires that carry the transmit data, the receive data and the data signal ground, the
