Parts & Supplies | Pick and Place/Feeders
Panasonic CM402/NPM feeder calibration jig CM402/NPM feeder calibration jig NM-EJW2A Panasonic Intelligent Feeder Check Unit (CM-402, CM-602, NPM) (2012) Brand: Panasonic Model #: NM-EJW2A Model ID: IFCU Year: 2012 Serial #: 11KV0600 Power
Technical Library | 2020-12-07 15:26:06.0
Temperature cycling testing is a method of accelerated life testing done to PCCs that are exposed to normal operation temperature variations over its lifetime. During the testing, intermittent "open" failures can first occur at the hot and cold extremes of the test, exposing weaknesses in the design and assembly. A poor/weak solder joint fatigues, a via trace or barrel cracks, loose connections or a component fails all causing an intermittent open. When not at extreme temperatures, the PCC assembly relaxes, the "open" closes creating electrical connectivity. If you are monitoring the PCC under test in-situ you will know that an intermittent failure has occurred, and the test could be stopped for inspection. If in-situ monitoring was not implemented, you would not know if there were intermittent failures or not. The PCC gets powered up and works fine at room temperature.
Parts & Supplies | Pick and Place/Feeders
SMT basic process components include: silk screen (or dispensing), placement (curing), reflow soldering, cleaning, testing, repair 1, silk screen: its role is to paste or patch solder paste printed on the PCB pad, the components f
Technical Library | 2019-06-21 10:39:15.0
Recently, an ACI Technologies (ACI) customer called to discuss failures that they had observed with some through-hole capacitor parts. The components were experiencing failures following vibration and accelerated stress testing. Upon receipt of the samples, ACI performed three levels of inspection and Energy Dispersive Spectroscopy (EDS) testing to investigate the root cause of the failures. These analyses enabled ACI to verify the elements comprising the solder joints and make the following recommendations in order to prevent future occurrences. The first inspection was to investigate the capacitor leads using optical microscopy, and no anomalies were found that could indicate bad parts from the vendor or improper handling prior to assembly. However, vertical fill in the barrel of the plated through-holes was too close to the IPC-A-610 minimum specification of 75% to determine a pass/fail condition, and therefore required further investigation.
Parts & Supplies | SPI / Solder Paste Inspection
Quick programming, friendly programming interface Multiple measurement methods True one-button measurement Eight-way motion button, one-click focus Adjustable scanning pitch Solder paste 3D simulation function Powerful SPC function MARK
Parts & Supplies | Assembly Accessories
TEST PCB LP3 ..00359534-01 Tester PEL-2002A Push pull tester NK-500 Neon lamp tester SX-C Test Probes (Universal Probe) TL20 Probes Connector Test Point temp (Male) SMPW-K-M. DIP TESTER DS-10
Parts & Supplies | Assembly Accessories
TEST PCB LP3 ..00359534-01 Tester PEL-2002A Push pull tester NK-500 Neon lamp tester SX-C Test Probes (Universal Probe) TL20 Probes Connector Test Point temp (Male) SMPW-K-M. DIP TESTER DS-10
Parts & Supplies | Pick and Place/Feeders
JUKI 2050 machine failure solution KE2050M Z-axis fault E620014 error handling method! Suddenly heard the sound of the machine. The machine stopped the fault for the E620014Z axis drive alarm. View the drive. For Z drive 1, the third light is on
Parts & Supplies | Pick and Place/Feeders
The definition of SMT SMT is the surface assembly technology,surface mount technology(surface mount technology)(Surface Mounted Technology abbreviation),is currently the most popular electronic assembly industry,a technology and technology. What a
Parts & Supplies | Depanelizers / Routers
SMT conveyor 1. modular design, optional assembly as per client’s requirement. 2. Rugged steel design, improves equipment stability . 3. Smooth stainless steel screw to adjust the width of the rail. 4. variable speed control. 5. Circuit b
