Electronics Forum | Wed Jan 18 09:01:21 EST 2017 | tombstonesmt
We had the same issue with the filament loader. We have a flash forge Pro; mounted the spool above the printer. Here is the filament. http://www.3dxtech.com/search.php?search_query=esd
Electronics Forum | Mon Jun 26 09:33:07 EDT 2017 | bobpan
So I am assuming that you are using the IQ feeders option on the machine. First thing I would check is to make sure you don't have an older feeder on the machine. There was a certain point where quad feeders would be 'IQ' capable or not. You may have
Electronics Forum | Fri Jan 06 18:20:01 EST 2017 | sarason
AS wonderful as your experiment in 3D printing is. WOuld you have been better off taking a print feeder roller out of an inkjet , with the right diameter and cutting to size on a dropsaw! Another approach is to find a supplier in the printing indust
Electronics Forum | Fri Jan 13 09:48:27 EST 2017 | westshoredesign
10mins to print an 8mm wheel. Experimenting with both Ninja Flex, and Ninja Semi-Flex, I think the Flex is probably going to be the winner though. Had to upgrade our filament feeder on the printer to use either of them. Totally worth it though. Not s
Electronics Forum | Tue Jan 10 08:05:51 EST 2017 | tombstonesmt
That is literally twice the amount of work. The drawing would've taken 10 minutes tops. I would've gone to lunch and that would've been done printing. We have a 3D printer in house as well using ESD safe filament. We've used it for tooling, prototyp
Electronics Forum | Mon Aug 17 15:19:16 EDT 2020 | jmelson
I have a (new to me) Quad QSA-30A that I just got about a week ago. At first, I could get it to go ready most of the time, now it will never go ready. I have traced the ready button into the DPRAM board and the logic is OK all the way into one of t
Electronics Forum | Thu Feb 14 23:32:50 EST 2013 | padawanlinuxero
Hello ! I don't know if this helps but here goes, I have here 2 mydatas one a TP9-4 and the other MY12, on the TP9-4 we have TPSys 2.4 and we use a AM8 feeder magazine, when we bought the MY12 it came with TPSys 2.1, thinking we can use the AM8 feede
Electronics Forum | Mon Jan 12 14:50:18 EST 2009 | mosborne
A customer of mine has a Quad 4C that will not home in the X. It used to have the problem in the Y then they changed the cards and now that machine will not home in the X when powered up. Anybody have any ideas. I think I know what the problem is, bu
Electronics Forum | Fri Feb 15 08:37:44 EST 2013 | cyber_wolf
I think your MOT cards have to get upgraded too.
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
