Electronics Forum | Mon Oct 09 08:22:10 EDT 2017 | joycehughes
Thank you - we will follow your directions.
Electronics Forum | Wed Nov 02 11:27:45 EST 2005 | rlackey
Depends on the actual requirements of the machine & the skill of the operator, but for that sort of money I've seen Juki 570's with a stack of feeders, Versatronics RV4's, older Mydata's, Samsung CP30's, Essemtec, Philips CSM's etc. I even once bough
Electronics Forum | Sat Oct 07 10:16:00 EDT 2017 | tsvetan
1. Secure all linear bearings to not move during the transport 2. Wrap the machine completely with stretch folio to protect from dust and moisture 3. Attach shock sensor to it so when it arrive you can see if it was subject to harsh transport
Electronics Forum | Thu Jul 09 10:29:54 EDT 2020 | bobpan
12vdc on top pin 5vdc on bottom pin ground on second pin up from bottom. the rest are only needed for IQ function on Quad assembler. Bob
Electronics Forum | Thu Jul 09 16:07:22 EDT 2020 | bobpan
I love beer...haha IQ is communication between the feeder and machine to let the software know that the machine is picking the correct part. If you need further help....you can email me at www.precision-repairs.com
Electronics Forum | Thu Jul 09 15:58:50 EDT 2020 | tylerrobertson
Bob you like beer? I'll send you a beer.. what's the IQ function, just feedback from the sensors/switches on the feeder?
Electronics Forum | Wed Jul 08 23:07:18 EDT 2020 | tylerrobertson
Hello, Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA Was able to get the board to power up and flas
Electronics Forum | Sat Aug 22 16:53:32 EDT 2020 | jmelson
I'm trying to diagnose a Quad QSA-30A machine that won't go ready. I have the machine technical drawings, they have overall machine schematics and cable wiring on most of the cables, but that's all. Does anyone have access to the schematics of the