Industry News | 2022-09-21 08:15:06.0
Koh Young Technology will share its perspective on test standards, systems, and criteria for electronic vehicle (EV) applications in a panel webinar on 27 September 2022 at 10:30am EST
Technical Library | 2021-11-17 18:53:50.0
The demand for product miniaturization, especially in the handheld device area, continues to challenge the board assembly industry. The desire to incorporate more functionality while making the product smaller continues to push board design to its limit. It is not uncommon to find boards with castle-like components right next to miniature components. This type of board poses a special challenge to the board assemblers as it requires a wide range of paste volume to satisfy both small and large components. One way to address the printing challenge is to use creative stencil design to meet the solder paste requirement for both large and small components. ... The most important attribute of a stencil is its release characteristic. In other words, how well the paste releases from the aperture. The paste release, in turn, depends on the surface characteristics of the aperture wall and stencil foil. The recent introduction of new technology, nano-coating for both stencil and squeegee blades, has drawn the attention of many researchers. As the name implies, nano-coated stencils and blades are made by a conventional method such as laser-cut or electroformed then coated with nano-functional material to alter the surface characteristics. This study will evaluate nano-coated stencils for passive component printing, including 01005.
Technical Library | 2013-02-07 17:01:46.0
Silicone contamination is known to have a negative impact on assembly processes such as soldering, adhesive bonding, coating, and wire bonding. In particular, silicone is known to cause de-wetting of materials from surfaces and can result in adhesive failures. There are many sources for silicone contamination with common sources being mold releases or lubricants on manufacturing tools, offgassing during cure of silicone paste adhesives, and residue from pressure sensitive tape. This effort addresses silicone contamination by quantifying adhesive effects under known silicone contaminations. The first step in this effort identified an FT-IR spectroscopic detection limit for surface silicone utilizing the area under the 1263 cm-1 (Si-CH3) absorbance peak as a function of concentration (µg/cm2). The next step was to pre-contaminate surfaces with known concentrations of silicone oil and assess the effects on surface wetting and adhesion. This information will be used to establish guidelines for silicone contamination in different manufacturing areas within Harris Corporation... First published in the 2012 IPC APEX EXPO technical conference proceedings.
Technical Library | 2017-07-06 15:50:17.0
Head-in-pillow (HiP) is a BGA defect which happens when solder balls and paste can't contact well during reflow soldering. Package warpage was one of the major reasons for HiP formation. In this paper, package warpage was measured and simulated. It was found that the package warpage was sensitive to the thickness of inside chips. A FEM method considering viscoelastic property of mold compound was introduced to simulate package warpage. The CTE mismatch was found contributes to more than 90% of the package warpage value when reflowing at the peak temperature. A method was introduced to measure the warpage threshold, which is the smallest warpage value that may lead to HiP. The results in different atmospheres showed that the warpage threshold was 50μm larger in N2 than that in air, suggesting that under N2 atmosphere the process window for HiP defects was larger than that under air, which agreed with the experiments.
Industry News | 2023-10-23 09:57:34.0
Koh Young Technology, the leader in True3D™ measurement-based inspection solutions changed the industry over 20-years ago with its multi-projection solder paste inspection machine. The electronics manufacturing industry quickly adopted the patented technology, which is now the de facto standard SPI machine in the market. On 30 October during the SMTA Tampa Bay Technical Forum, Ray Welch, Senior Applications Engineer at Koh Young will discuss the growing importance of SPI as a process improvement tool.
Industry News | 2009-12-07 18:47:04.0
November, 2009 - EVS International, the world leader in solder recovery System’s, announces the launch of a brand new interactive website aimed at Explaining to the industry the enormous cost and environmental benefits from automating the solder dross recovery element of the wave soldering process.
Industry News | 2024-07-22 09:33:59.0
Seika Machinery, Inc. is pleased to announce an upcoming webinar focused on solder paste process control. This educational session, part of the Malcom Process Control Webinar series, will be held on July 31 at 10 a.m. PST.
Industry News | 2009-12-07 18:49:39.0
GREELEY, CO — September, 2009 - FCT Solder, a division of FCT Assembly and an authorized Licensee of Nihon Superior Co. Ltd.’s SN100C product line, announces plans to exhibit its popular SN100C® Lead-Free Solder Paste, Bar and Wire and UltraSlic™ FG solder paste stencil in Hall A4 Stand 570 of the upcoming Productronica exhibition. The event is scheduled to take place 10th – 13th November 2009 at the New Munich Trade Fair Center in Munich, Germany.
Industry News | 2023-10-09 09:21:57.0
Indium Corporation is proud to count three of its experts amongst the presenters participating in the technical program at the upcoming IMAPS International Symposium on Microelectronics, October 3-5 in San Diego, California, U.S.
Industry News | 2015-02-19 10:13:46.0
In the last couple of years Bob has produced two free EBooks for engineers, each with over 100 pages of information, tips and illustrations to make introduction easier. Both titles are based on practical experience using these techniques in manufacture in different sites.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
