Electronics Forum | Thu Feb 21 15:11:29 EST 2008 | jlawson
Gerber standard has been around for long time as a fabrication data model for PCB makers, but not very useful for assemblers as no centroid data is actually present in the data. Also netlists are no supported and have to be calcualated with software
Electronics Forum | Sun Jan 29 02:33:36 EST 2006 | daxman
Hello all, I work with a company which runs a fairly small SMT department. For now, we have a "main" line consisting of a Fuji CP6-45, and a Fuji IP3, and a proto line which uses a Fuji CP4. We also use Fuji Flexa programming software. The issues
Electronics Forum | Wed Sep 17 11:13:06 EDT 2008 | daxman
You had mentioned that your volumes will be low? How about the mix? will you be changing over to different products a lot? How many different products will you be running? Will feeder setups be done by the operators or will you have a another departm
Electronics Forum | Thu Nov 01 21:44:32 EDT 2007 | daxman
Sorry everyone...you all seem to be fond of the MyData machines. I just had to make a comment. We had a TP9 for about 2 years. It rarely got used because of the terrible programming interface..When compared to Fuji Flexa and Fuji machines, we reall
Electronics Forum | Wed Jun 19 09:08:30 EDT 2019 | BigFuji642
I'm trying to get a Fuji CP 642 to communicate with Flexa and I am having some difficulties. The machine has a RS232 25pin Data Port on the side of the machine. There is also a RS232 25pin Device Port located under the Data Port. Do both the Data
Electronics Forum | Fri Oct 28 14:35:15 EDT 2005 | aespino
Does anyone know how to generate a Part Data for a QFP with bumper for a IPIII machine on MCS software? I realy have a bad time with this issue,somehow the vision type is not detected...
Electronics Forum | Wed Dec 05 19:15:16 EST 2001 | cnoonan
Does anyone have any information on the equipment manufacturer "My Data" I know Fuji, Siemens, Universal and some Panasonic, but �My Data� I have no clue. I am looking for people that have, worked with or on. Are they worth looking into? Looking
Electronics Forum | Thu Apr 03 11:36:54 EST 2003 | stefwitt
I don't know too much about Fuji, but I'll try myself anyhow. How is the coplanarity unit communicating with the machine controller? Attach a logic analyser, second listener or data analyser and "listen" to the communication with the machine contro
Electronics Forum | Fri Sep 03 00:17:21 EDT 1999 | JAX
You use MCS computers to transmit programs/data to machines | | --> MCSs are getting old, so you would like to use F4G or FujiCam just because you could use a standard 486/Pentium | | --> But you still like your current programming SW (obviously not
Electronics Forum | Wed May 27 16:39:33 EDT 2009 | rmitchell
Hi, I think vision 20 will work as well. If not we have used 100 or 105. Have you tried placing the part with the machine trace on? If so is it finding all the leads? any error codes? If you are defining the leads in the EL lead data I would not d
