Electronics Forum | Thu Dec 02 18:09:28 EST 2004 | resslerr
There are a few solution out there...Aegis, Valor, Technomatix...each with their own shortcomings. Check out the integrated solution offered by Router Solutions Inc. & Sony. They offer a real solution to cover the entire assembly and test cycle, wi
Electronics Forum | Mon Nov 22 09:31:29 EST 2004 | cyber_wolf
We have tried the vision both ways. Leads/body. Same issue. FYI Ken : The parts were not hitting the feeder pan on the back of the machine. I know this sounds really weird, but it seems that when we generate a program from Flexa(as opposed to FujiC
Electronics Forum | Thu Oct 13 14:14:10 EDT 2005 | rcanten
It depends on the type of connector but if you have a connector that has projections on the ends that look similar to leads in the lighting you will be hard pressed to get this to place with anything other than a vision number 6 on a IP2 and then the
Electronics Forum | Tue Mar 20 19:18:53 EDT 2007 | diesel_1t
Hi to all, thank you very much for your feedback. The part is rotated before inspection; and also tend to be shifted to the same direction of pre-rotation so i think is not correcting misalignment or maybe some settings on shape data are not correc
Electronics Forum | Fri Mar 13 15:00:18 EDT 2009 | dman97
Can somebody take a look at this screen shot and tell me what it is supposed to mean. Every time I try to transmit this program to my CP642 machine I get this error. Does any one know what this error means and how would I correct it? Thanks for yo
Electronics Forum | Thu Jan 16 08:00:10 EST 2014 | alexeis
Hi, We have developed some tools for preparing SMT setups (programs/placement list). Please read about our solutions (like QPlace and QPlan) on our website: http://www.proventustech.com. Also, feel free to contact me by email: alexeis@proventustech
Electronics Forum | Fri May 02 14:11:13 EDT 2014 | comandorobles176
We recived a used IP3 and don't have NG parts conveyor and I want to set the proper to discard component only in ng parts discard box.I think is in "Machine_ID" but I don't know how, we have Fuji Flexa sofware. any help?
Electronics Forum | Wed Jan 06 12:51:39 EST 2016 | scotceltic
Is anyone aware of any easy to use conversion software that will take a current Fuji Flexa SMT program and create an ASM (Siemens) SMT program. I am aware of the 3rd party vendors (Circuitcam by Aegis, Valor etc.) but most of these require most or al
Electronics Forum | Thu Sep 09 03:57:45 EDT 2004 | svi
Hello, We used FujiCAM to prepare FCM programs but now we're thinking to change it to an other software. We have some FCM and some (more) FUJI machines also. We used FujiCAM to controll and proram the lines but we changed it to Fuji FlexA. Microsof
Electronics Forum | Mon May 01 15:55:35 EDT 2006 | pfifla1
Well Fuji sends software updates directly to PC and at the end of every year it is required to install the new updates to keep running so pretty much if you have the PC you have the software for life. unlike software like circuitCam and others that u
.gif)
