Eliminate Human Error During the Changeover and Assembly Process. The Process Monitor Device (P.M.D.) is designed to eliminate human error during the change over and assembly process. The system will monitor all part errors. On the operator screen,
The XP-243E provides accurate placement of small parts to larger odd-form components in a compact footprint. On-the-fly vision inspection and optical correction ensure the most accurate placements. Fuji's new dual vacuum (V2) nozzle holder performs
Electronics Forum | Fri Dec 15 11:01:14 EST 2017 | robertorocco
I have one Topaz X FNC machine with this problem. The head 2 FNC not change the nozzle. The head 4-6-8 is ok and change, but head 2 no, when he tries to change the nozzle he gives me an error message. What could be the problem?
Electronics Forum | Thu Nov 08 02:09:05 EST 2018 | vinitverma
If the nozzle gets changed properly but the machine still gives the sensor, then the FNC nozzle detection sensor needs to be adjusted. It is a set of 2 sensors on a plate on the either side of the FNC. If the nozzle is not changed successfully and ge
Used SMT Equipment | Pick and Place/Feeders
The AIMEX III can support large panels up to 774 (L) x 710 (W) mm in size. Simultaneous production of two different products is possible using our dual conveyor configuration machine. The AIMEX III also enables various production methods and support
Used SMT Equipment | Pick and Place/Feeders
FUJI/NXTIIC Used Chip Mounter The Fuji NXT is designed to meet the demands of modern production environments. Its interchangeable placement heads allow each machine module to function as either a high speed chip counter or a multi-function placemen
Industry News | 2023-08-12 13:48:10.0
In the SMT production process, considering the importance of the mounting speed of the SMT machine, many SMT machine manufacturers are making every effort to improve the speed of the SMT machine. KINGSUN technical team has analyzed the following main methods to improve the speed of the SMT machine:
Industry News | 2014-12-17 19:57:30.0
Fuji's Scalable Placement Platform NXT III now supports 0201 mm (0.25 x 0.125 mm, 008004") components as standard. By loading the newly developed H24G head on the NXT III, 0201 mm (0.25 x 0.125 mm, 008004") components can be supported without any change to the specifications of the machine (speed: 35,000 cph, accuracy: ±25 μm). The Intelligent Part Sensor (IPS), which checks the orientation of parts on the nozzle and ensures that the part does not remain on the nozzle after placement, is standard on the H24G placement head.
Parts & Supplies | Pick and Place/Feeders
GIC-F02 FUJI CP6 Feeder Calibration JIG It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the error of
Parts & Supplies | Pick and Place/Feeders
GIC-F01 FUJI NXT Feeder Calibration JIG It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the error of
FUJI SMT Placement AIMEX III If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. Pick and place machine, SMT pick and place machine, FUJI SMT m
FUJI Pick and Place Robot M3 III Placement If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof our products. Pick and place machine, SMT pick and place mach
Career Center | EDEN PRAIRIE, Minnesota USA | Production
Logic PD collaborates with clients to help them launch products that accelerate growth and capture value in the Internet of Things (IoT). Logic PD helps at any stage in the product lifecycle by being the complete product innovation and product realiz
Career Center | cabuyao, Philippines | Engineering
I had 9 years working as a technician starting in Smart electronic)as Mainline Technician. SGIC(Sanritsu Great International Corporation) as SMT mainline Techinician and IMI (Integrated Micro-Electronics INC,)as SMT Process Technician.
Career Center | kemaman, malaysia Philippines | Maintenance,Production,Technical Support
• Conduct repairs and troubleshooting of production equipment to avoid / minimize production downtime. • Performs preventive maintenance of production equipment as defined in work procedure and according to their schedule of frequency. • C
KingFei SMT Tech | http://www.smtspare-parts.com/sale-10643980-pitch-change-screw-j2500360-for-samsung-cp12mm-feeder-screw.html
/ 502 / 503 / 504 / 505 / 506 / 507 / 508 For KE2000 Machine FUJI NXT H01 SMT Nozzle 7.0 AA08000 Original New For FUJI SMT Machine Mini Black SMT Nozzle 00321854 05 SIEMENS Pick UP Nozzle 711 / 911 Request A Quote Send E-Mail | Sitemap
| https://www.hitachi-feeder.com/sale-9543024-hitachi-gxh-gxh-3-feeder-cart-bank-feeder-change-cart.html
Hitachi Feeder cart Hitachi Nozzle Hitachi Spare parts Hitachi Yamaha Machine Panasonic Feeder Juki Feeder Assembleon Feeder FuJi NXT/AIM Feeder SAMSUNG Feeder Search Home Products Hitachi Feeder cart