Electronics Forum | Wed Apr 13 15:21:25 EDT 2005 | mmjm_1099
Thats called technician syndrome (fine when your there and bad when you walk away). Is someone inspecting the board before reflow? If so make sure they don't touch it and run about 5 boards and see if it's consistent for placement. What type of pro
Electronics Forum | Wed Jun 29 19:33:12 EDT 2005 | matjen
After the machine stops for any reason when restarted the z table goes to loader position comes up then goes back down and re-reads the fiducials, only one machine does this but we are losing valuable cycle time after every part change. We have Fuji
Electronics Forum | Mon Oct 10 22:29:04 EDT 2005 | matjen
We are trying to place a connector with a IP2 but every vision # we have tried will not place the connector, If anyone has any flexa experience or knows a vision # that we can enter in that will place a odd shaped connector please let us know, Th
Electronics Forum | Thu Oct 13 14:14:10 EDT 2005 | rcanten
It depends on the type of connector but if you have a connector that has projections on the ends that look similar to leads in the lighting you will be hard pressed to get this to place with anything other than a vision number 6 on a IP2 and then the
Electronics Forum | Sun Apr 30 16:56:22 EDT 2006 | mrduckmann2000
I am sure that Fuji will transfer the ownership, it will cost some money but they will do it. I have been with a company that has had to transfer Panasonic equipment to 3 different owners over the last several years. It cost approx $10k to do the t
Electronics Forum | Mon May 01 05:47:29 EDT 2006 | aj
Hi, Did you sell the PC that you had Flexa Installed on as part of the package? If so , you should have no problems. Fuji should just send the updates directly to the new customer. If there is a fee for this so be it , its not your problem.( in hind
Electronics Forum | Tue Mar 20 19:18:53 EDT 2007 | diesel_1t
Hi to all, thank you very much for your feedback. The part is rotated before inspection; and also tend to be shifted to the same direction of pre-rotation so i think is not correcting misalignment or maybe some settings on shape data are not correc
Electronics Forum | Thu May 10 12:44:25 EDT 2007 | mmjm_1099
I was wondering if anyone is using the Macro program that came with flexa. If so, how are you using this because I feel maybe it could be used more on my end. I use a CP43 and QP341 so NXT and AIM users any feedback would be for other users to see if
Electronics Forum | Fri Mar 13 15:00:18 EDT 2009 | dman97
Can somebody take a look at this screen shot and tell me what it is supposed to mean. Every time I try to transmit this program to my CP642 machine I get this error. Does any one know what this error means and how would I correct it? Thanks for yo
Electronics Forum | Tue Mar 17 19:39:48 EDT 2009 | dman97
Never mind. I figured it out. It seems that the part numbers I assigned were too long. I shortened them to 15 characters and it worked. I find it strange that the p/n's were too long, but Flexa did not catch this as an error, and instead proceede