Electronics Forum | Tue Nov 20 06:19:42 EST 2007 | kircchoffs
just add FIP2 in fujiflexa when you are adding machine at factory lines. if you are connected just receive the proper data from the machine and re-transmit the proper data.
Electronics Forum | Mon Nov 04 11:16:14 EST 2013 | cyber_wolf
What you are asking is not practical. ALL parameters in the part data are key. When parts get rejected, there is an error code generated at the machine. You need training and this is not something that is quick and easy if you have no experience.
Electronics Forum | Fri Nov 01 13:36:03 EDT 2013 | jimmyboz
You just are not getting any respect here. I do not have Flexa in my possession, but what machines and what parts, your initial question is too vague for answers.
Electronics Forum | Tue Mar 20 19:18:53 EDT 2007 | diesel_1t
Hi to all, thank you very much for your feedback. The part is rotated before inspection; and also tend to be shifted to the same direction of pre-rotation so i think is not correcting misalignment or maybe some settings on shape data are not correc
Electronics Forum | Thu Mar 12 00:32:12 EDT 2015 | mdang
I am setting Fuji Flexa to communicate with CP8 machine. When I create a new machine, I has to fill out the following value Machine Communication Server: ? Get Production Data : (yes/no) GEM Host Name: ? Disable GEM : (Yes/no) TCP/IP Port #: ? I c
Electronics Forum | Wed Jan 06 12:51:39 EST 2016 | scotceltic
Is anyone aware of any easy to use conversion software that will take a current Fuji Flexa SMT program and create an ASM (Siemens) SMT program. I am aware of the 3rd party vendors (Circuitcam by Aegis, Valor etc.) but most of these require most or al
Electronics Forum | Fri Jun 07 13:41:50 EDT 2019 | reckless
We decided to use F4G over flexa. Flexa sounds overly complicated for us. All we want to do is pop gerber and centroid data. We have very few boards to load in. My new issue is F4G is 16 bit and trying to find an old windows 2000 machine that wor
Electronics Forum | Tue Jul 17 15:26:08 EDT 2012 | kruzer
Hi I use CP4, CP6, CP643, GLV and NXT, but i have a problem with CPIV, i cant use It with Director Fuji Flexa. i use snifer rs232 (rs232mon) to resolve problem and what i know: Computer send on rs232 to machine (every 1 min or something): vQN2105
Electronics Forum | Fri Nov 01 17:32:34 EDT 2013 | dhruv_trylene
I am sorry for not being clear enough... We have a FUJI CP642 and a IP3 machine. At present, we have to create part data for each and every part used in a job, which consumes a lot of time. I was just wondering if there was a way to minimize this?
Electronics Forum | Tue Dec 06 19:44:10 EST 2011 | comando
Hello every one! I need help with a misaligned theta at plcc44, the machine is a IP3 smd3, firmware 2.99, vision card 4400 and both camera type YD2048N on label but in Proper data is set 2 (I don't know if this is right) we use Fuji flexa, Back Lig
