Electronics Forum | Sun Nov 30 04:05:13 EST 2008 | tsvetan
not so huge if you work with cotton gloves Tsvetan
Electronics Forum | Mon Dec 01 11:24:41 EST 2008 | muse95
What do gloves have to do with it? The paper is what could be holding the ESD charge.
Electronics Forum | Tue Feb 24 11:42:09 EST 2009 | realchunks
You are correct. But like schmocks, the science behind it gets lost.
Electronics Forum | Wed Feb 25 09:10:13 EST 2009 | ccouture
isn't "wireless ESD grounding" called "lightning" in layman's terms?
Electronics Forum | Fri Apr 26 12:18:24 EDT 2002 | Yngwie
Today the line experienced the white gloves turns green at the point of contact when holding fresh board that came out from wave soldering. Was that the effect of inproper solder mask curing at PCB house during fabrications ? For a proper cured solde
Electronics Forum | Mon Nov 04 14:45:01 EST 2002 | erikb
As a rule handling PCB's with bare hands is acceptable provided that there is sufficient esd protection as well. It is a good rule of thumb however to provide your inspectors or assembly people with finger cots or cotton gloves to keep the product cl
Electronics Forum | Mon Feb 28 11:37:35 EST 2005 | PeteP
You may well find it is the powder used in the gloves. Distributors offer gloves without powder. Also beware of using hand products with Lanolin, Mineral oil, Rose Hip oil, etc around electronics assembly ... solderability issues may crop up and ta
Electronics Forum | Thu Nov 10 16:15:52 EST 2005 | 1st Article
Sumote, I suggest DESCO ESD safe het gloves, these gloves have a polyester exterior fabric with woven conductive fibers to ensure static protection. Inner lining constructed of material for use in heat assembly processes, can with stand 200�F maximum
Electronics Forum | Thu Nov 10 16:19:42 EST 2005 | 1st Article
Dear Sumote, I would suggest DESCO ESD safe heat gloves, we are using them at our facility, these gloves have a polyester exterior fabric with conductive fibers to ensure static protection. Inner lining constructed of material for use in heat of 200�
Electronics Forum | Wed Feb 04 09:21:09 EST 2009 | rameshr
Dear Sirs, We are looking for a quality/EHS approved vendor/make/part for safety products - gloves ,glasses for the following applications, 1.SMT Sceen printing Operator. 2.Reflow & Wave Soldering Operator. 3.PCB Cleaning. We would like to get detai