Electronics Forum | Thu Apr 21 11:01:18 EDT 2011 | frcdave
Hi, I would be happy to discuss the capabilities of both technologies, and more over the companies you are thinking about partnering with, if you would like to PM me. I have sold both technologies, Pattern Match and Algorithm based, and can dive deep
Electronics Forum | Fri Dec 16 01:25:35 EST 2011 | AAAA
Hi, We are using CyberOptics Flex Ultra for 7 years, and believe me it requires a lot of time to create and tune up the programs. In my opinion, this machine is not suitable for high mix low volume production. Also we have Omron AOI, which is algor
Electronics Forum | Wed Dec 17 03:26:17 EST 2003 | Kev
Hi Lads, Thanks for all of the replies. To answer a few of your questions..... My wave is a Hollis PT500N. It has 3 zones of pre-heater rod elements. Each individual element (601195-01) is 500 watts. There are 16 elements per zone so 8 Kw per zone.
Electronics Forum | Tue Feb 08 19:24:30 EST 2011 | swag
We are going to buy a new reflow oven this spring. It will replace one that is currently on-line. I have a small handful of golden boards wired with thermocouples and a ton of data to support the transfer of those specific builds. The hurdle is th
Electronics Forum | Tue Dec 16 15:43:50 EST 2003 | patrickbruneel
Kev, I looked up records of various hollis machines with 3 preheat zones. and with progressive preheat temp. of 300 400 and 500 with a speed of 3.5ft/min the topside board temp was 120C before entering the wave. the preheat elements were infrared. W
Electronics Forum | Thu Apr 15 20:41:22 EDT 2004 | Ken
There are ledgitimate reasons for checking furnace calibrations, but let me clarify what that is. 1. TC's are not necessarily calibrted. Not unless you need "absolute" accuracy. TC's operate against a (non-linear) standard +/- a tolerance. Most
Electronics Forum | Fri Oct 01 13:37:27 EDT 2004 | rkevin
Well Thanks for all the good advise. Lots of different opinions on this one. I took the advise to contact my current supplier of solder paste. They sent in one of their tech people along with a sales guy and we ran without much trouble. Other than a
Electronics Forum | Wed Jun 21 03:45:53 EDT 2006 | emeto
Hello SMT netters, Can anyone help me with AOI algorythms. I have to find out the differences between algorythms for recognition(black and white, grayscale, matching, golden board.....). I know all of you are using different type of AOI machines. C
Electronics Forum | Tue May 03 07:18:01 EDT 2011 | dontfeedphils
I've dealt with YesTech, Mirtech, and most recently CyberOptics, and so far my favorite is without a doubt the CyberOptics. The Yestech (pattern match) is very easy to program and use but it took sooooo much up-keep to keep the false calls to a mana
Electronics Forum | Mon Nov 21 18:39:55 EST 2011 | khid
i've been in manufacturing for 15 yrs. I used AOI with match patter as well algorithm base in one machine. Easy to program, can built in global library based on your cspecs or part number use in the manufacturing line. ROI can be achieved in the shor
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, CA USA
Phone: 5102268155
