Electronics Forum | Fri Jan 04 07:54:24 EST 2008 | benzy1961
My experience has been very different from the other responders. We put an in-line system in place about 3 months ago and the results have been pretty eye-opening. We were astounded to see how many prints were actually bad once we started inspectin
Electronics Forum | Tue Feb 11 22:28:25 EST 2003 | davef
What do you mean by "new information"? On final module testing: * If you have hypercorroded nickel and you detect it during final testing, you'll notice it. * If you have hypercorroded nickel and you don't detect it during final testing, you'll ship
Electronics Forum | Mon Oct 19 12:03:09 EDT 1998 | Scott Cook
Out of interest, are you using an 84V? 84VZ? a 60V? 60VZ? With SBIP or the Yamaha vision system (VICS 1000)? Do you have the old tray sequencer? > WRONG!!!! Why do folks still live in this mindset? I'm not slamming you personally. But this is preva
Electronics Forum | Wed Oct 21 21:27:32 EDT 1998 | smd
| | WRONG!!!! | Why do folks still live in this mindset? I'm not slamming you personally. But this is prevalent in our industry. | More opinion: | Make REWORK a nasty, dirty word. Work for the ROOT cause of a process problem. DO NOT ACCEPT rework a
Electronics Forum | Wed Mar 17 17:14:49 EST 1999 | Michael Allen
Another test to consider is dye penetrant analysis. The technique involves flooding the area beneath the soldered part with dye (preferably a bright color, like red). After drying the board+dye in an oven, you peel or torque the part off and inspec
Electronics Forum | Sat Mar 06 08:01:45 EST 1999 | Scott Cook
| Can someone please advise me to the rework procedure for removal and replacing Ceramic Chip Capacitors (e.g. 0805, 1206, etc.)? | | Is it necessary to pre-heat ceramic capacitors before soldering them onto a PCB with a soldering iron? Is this just
Electronics Forum | Fri Aug 07 01:02:51 EDT 1998 | zeek - just wanna to get a word in here
| | I am looking for advice or information from anyone about the possible reliability problems associated with epoxy on solder pads of discrete devices. Will the epoxy expand and lift over time, Will there be adverse reaction between the solder and t
Electronics Forum | Thu Mar 25 09:14:09 EDT 2010 | krish_bala
Hello, I have been having some troubling issues when it has come to BGA Placement and I was hoping if there have been others who have been able to resolve similar issues. We are curently doing reworks on a variety of BGA, but seem to be having issu
Electronics Forum | Mon Oct 11 11:13:32 EDT 1999 | Wirat S.
| | | We've recently encountered this problem where one of our .050" pitch BGA's were reflowing at the wave thus causing shorts... The board was profiled with probes stuck to a QFP solder joint, an 0603, and one of the BGA joints. There was an almo
Electronics Forum | Thu Jan 05 12:28:12 EST 2017 | rgduval
I'd recommend not using them, personally :) The long term reliability of the SMT joint is suspect, IMHO. I had them for an in-house manufactured bed-of-nails test fixture for testing somewhere north of 5000 units....after the first 100, we were rep