Electronics Forum | Wed Aug 17 10:46:48 EDT 2005 | pjc
MPM did not discontinue the camera, the camera manufacturer did. It�s not a custom made camera for MPM. Try searching used or second-source cameras. There are three types of vision systems offered on the SPM: manual cross-hair, semi-auto and high-res
Electronics Forum | Thu Jan 26 18:28:40 EST 2006 | MikeAJ
An adhesive style cleaner is primarily used as a "precleaner" for bare boards only. These machines are placed between the loader and the printer. The TekNek machines can be best compared to those disposable lint and hair rollers. The same type of rol
Electronics Forum | Fri Apr 10 18:51:39 EDT 2009 | boardhouse
Hi Jeff, Your board supplier could be correct in this way. The board could have had just a hair left of copper on the circuit, which would hold up under the electrical test process, but once you powered it up, then there was enough juice to burn th
Electronics Forum | Thu Dec 03 07:37:44 EST 2009 | duso02
The quality of the brush is most important. We use artist brushes from Torrington Brush Works. Sable works best but are the most expensive. We use more camel hair. They work best for us as we "hand coat" hundreds of boards a week and go through many
Electronics Forum | Sat Feb 27 01:16:16 EST 2010 | jmelson
I had a batch of Xilinx chips that I believe had microscopic hairs of the lead frame left as slivers on the leads. These maybe got encapsulated by the solder plating, and then were free to move when the chips were reflowed. You could see the tiny h
Electronics Forum | Thu Aug 30 21:25:17 EDT 2012 | kahrpr
And that is where I see the problem. When companies have failures that are unexplained they blame ESD. It’s the scapegoat failure. And the industry through fear has us so paranoid We have companies worrying whether if your hair is 2 inches long or 3
Electronics Forum | Thu Dec 23 21:47:28 EST 1999 | Dave F
Hell i thought he was talking about his hair!!!! Talk about identifying with someone!!!! Happy holidays, kins Dave F
Electronics Forum | Thu May 06 11:09:12 EDT 1999 | carl
Hi All; I'm looking for a cheaper place to optain Fuji Hair Pin clips for feeders. Currently the price from Fuji $9.00. I have check many others fastener Mfg, but no luck. Any feedback is welcome. Thanks
Electronics Forum | Thu Aug 23 01:16:53 EDT 2001 | mugen
Hello... that last paragraph reply, makes one sound like, Dilbert De Engineer..... Beware the pointy haired guy...
Electronics Forum | Wed Dec 19 11:52:24 EST 2001 | mparker
Have you tried to polish the flex with an ESD camel hair brush? The residual films - are they organic, left over from the water? Maybe try some TSP - tri-sodium phosphate, it's a mildly caustic detergent. A thorough rinse would be needed after using
.png)
