Electronics Forum | Mon Jul 05 03:44:53 EDT 2004 | johnwnz
Dave, I'm going to disagree with you on the ENIG, it's my 3rd choice only just beating out OSP for that 4th spot. 1. Immersion Silver - cheaper than ENIG, as flat and no issues with Brittle interface (black pad) or Gold Embrittlement) Longer shelf l
Electronics Forum | Tue Aug 24 14:49:58 EDT 2004 | jamyboy
Hi, I am trying to assemble a LTCC component > with Pd/Ag surface finish on to Sn/Pb/Ag solder > and Sn/Ag/Cu solder. I am passing it through a > reflow. I have observed poor wettability at the > solder-pad joint. Does anyone have information
Electronics Forum | Fri Aug 13 16:54:20 EDT 2004 | davef
If the terminations on your components are not barrier plated, you must be very careful about the amount of time you stay above liquidous. As you'd expect, longer is not better. The longer you stay at liquidous, the more of the component terminatio
Electronics Forum | Thu Aug 04 12:40:38 EDT 2005 | Ted
Hi all, I am wondering what everyone is using as a PCB finish for RoHS. There doesn't seem to be a favorite out there. I know there are many companies using a gold finish but I don't want to pay that much and I have also heard about reliability p
Electronics Forum | Mon Aug 08 22:32:18 EDT 2005 | adlsmt
If you are using fine lines and tight spacing ENIG may be cheaper than HASL. This is because there is not as much bridging at the board house between traces so they do less touch up. This would probably be even more true with no-lead. We have been us
Electronics Forum | Thu Jan 25 04:55:08 EST 2007 | greg york
Strange as we have had huge problems with Silver in Many different Assembly houses. Mainly with Nitric Acid based Silvers causing blow holes, non wetting and even the Nitric etching away the tracks on fine boards. It has been one of the main problem
Electronics Forum | Tue Mar 15 07:59:07 EST 2005 | mattkehoe
We are looking for some feedback on this situation. Please let us know if you have any ideas. Thanks in advance. I have been doing some studies on defects and such with our PCB's in prep for lead free and I've come to a conclusion about our process.
Electronics Forum | Tue Apr 17 10:16:42 EDT 2001 | davef
Welcome to SMTnet. Awww, those assemblers are always whining about something. Just tell him to shut-up and build the blankin� boards. Jeesh!!! We used to have copious archives on the topic on SMTnet and our friend Brian is working his fingers t
Electronics Forum | Tue Sep 14 10:10:39 EDT 2010 | teamcanada
We are having an issue with a PCB supplier. Their Tin HASL layer seems to be the problem. We have triedworking with them to correct their process. What seems to have helped is lowering their temperature of the Tin dip from 540 F to 510 F.We still ha
Electronics Forum | Fri Sep 17 03:13:00 EDT 2010 | grahamcooper22
In HASL pcb coating you need to fully coat the pads with solder and then blow off any excess solder to leave a nice coating on each pad. Generally pcb manufacturers try to give you a flat pcb pad to make your solder paste printing more consistent. To