Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
Electronics Forum | Thu Sep 17 13:26:45 EDT 2020 | emeto
New factory - old oven. Something is different in power in the new place. Compare with old place and fix.
Electronics Forum | Sat Sep 12 04:19:28 EDT 2020 | SMTA-64387098
I have just built a new factory and installed the old Heller 1707 XL oven. When I run the oven the LED panel lights and downlights in the entire building begin to shimmer after 2nd zone is switched on. It does not get worse when the whole 7 zones are
Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Mon Sep 14 21:31:33 EDT 2020 | dwl
Does the flickering go away once the oven reaches its set temperature? It will draw a lot more current while its warming up then when its running. Are your lights running on one leg of the same 415 VAC circuit? Reflow ovens are mostly resistive loa
Electronics Forum | Tue Mar 22 14:05:33 EDT 2011 | glenseely
Have you tried to contact Heller?
Electronics Forum | Tue May 19 13:29:33 EDT 2015 | dyoungquist
We have been running a Heller 1707EXL for 8 years and added a Heller 1707MKIII about 1 years ago. We have not had any problems with either one of them. We do both lead and lead-free assemblies along with BGA/LGA components. If speed/volume is not
Electronics Forum | Tue Mar 22 13:17:57 EDT 2011 | oangulo
I need to know the Heller 1707EXL chain oil jar part number and the oil part number. And where I can order them.
Electronics Forum | Mon Mar 03 13:09:44 EST 2008 | dyoungquist
We are using a Heller 1707EXL for both lead and lead-free assemblies with no problems. The zones can reach the temperatures needed for lead free. The belt speed can be adjusted so I'm not sure about your "run slow" comment. Maybe the 1707 is diffe
Electronics Forum | Tue Jul 30 03:57:29 EDT 2019 | SMTA-David
Hi, I am looking for software for 2003 model 1707 EXL reflow oven (HC1 controller). I believe latest version for that model is 1.0.6.5.8 (98 Win) or 4.0.2.1 for XP. Thanks
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800