New Equipment | Board Handling - Pallets,Carriers,Fixtures
The low cost surface mount carrier used to hold PCB’s in place without tooling pins. The composite fixture is engineered to use flexible tabs that press the edges of the PCB into an accurate location. With downward pressure and nothing above the P
Accurate repeatable printing and simple-safe operation have all been achieved with the screen printers from Mechatronic systems GmbH in Regensburg. The units are designed for fast workflow and job change over including both the pcb and frame. The equ
Electronics Forum | Tue Jul 05 17:09:40 EDT 2022 | madisreivik
PROBLEM SOLVED :) ! I messed with parameters, then started to check hardware again. and.... There are 2 transport position on the carrier 1) vacuum 2) mech clamp Both have fiber position sensor which shows the status When there is component, the
Electronics Forum | Thu Mar 29 20:15:41 EDT 2007 | darby
PCB > Origin > Origin 0 4 Teach the corner of the pcb at the mechanical stop. This data is from the machine origin. For a unit with a teach camera it will probably be around -25x, 95y. For a beam sensor around 70x, 28y. This is for a right to left
Used SMT Equipment | Screen Printers
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Used SMT Equipment | Screen Printers
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Industry News | 2021-11-04 21:34:47.0
Hollow shaft encoder is also known as hollow encoder. When installing this type of encoders, it is necessary to avoid rigid connection with the encoder. Please refer to the instructions for the size of the installation shaft. When installing, the encoder should be gently pushed into the quilted shaft. It is strictly forbidden to knock with a hammer, in order to avoid damaging the bearing and the encoder as whole. After a hollow encoder has been used for a long time, you should check whether the screws fixing the encoder are loose.
Industry News | 2018-01-31 08:06:54.0
Apex Factory Automation introduces the new SJIT HP-520E printer. This platform retains most of the features of its predecessor, the popular HP-520S, but at a new, lower price point.
Parts & Supplies | SMT Equipment
ORIGINAL SMT MACHINE SPARE PARTS JUKI 40007372 FX-1 FX-2 POSITION CONNECTION PCB ASM JUKI Nozzle Specifications: Brand Name JUKI POSITION CONNECTION PCB Part Number 40007372 Model Number Ensure Tested buy juki Guarantee 1 month usage for m
Parts & Supplies | SMT Equipment
JUKI Genuine spare parts JUKI 40053295 2070 2080 1070 1080 Y MOTOR HC-RP153D-S2 Specifications: Brand Name JUKI Y MOTOR Part number 40053295 Model HC-RP153D-S2 Ensure Test in machine confirmation Guarantee 1 month usage for machine KE107
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Effect Of Board Clamping System On Solder Paste Print Quality Effect Of Board Clamping System On Solder Paste Print Quality Stencil printing technology has come a long way since the early 80s when SMT process gained importance in the electronics
KD Electronics Ltd. | http://www.kundasmt.com/?A-Equipment-Accessories/6006.html
PART:f,long 00317677-03 SIDE PANEL b 00317678-04 HOLDING-DOWN DEVICE RIGHT 00317679-04 RETAINER - LEFT SIDE b 00317680-03 ROCKING LEVER RIGHT 00317681-03 ROCKING LEVER LEFT 00317682-01 Gegenhalter 00317684-01 BEARING AXIS 00317690-01 ADJUSTING SPINDLE 00317696-03 SPINDLE NUT FLANGE 00317711-01 TOOTH BELT
