Electronics Forum | Mon May 19 15:42:37 EDT 2008 | torch
hey folks, just finished a quick 4 day training course on our 2nd user Quad QSV-1 and will probably have more questions later on but for now can someone confirm that qsoft needs its theta data in + numbers and cannot handle - theta figures? what i m
Electronics Forum | Thu Jun 14 20:54:57 EDT 2012 | deanm
We have a Quad QSV-1 and have had some trouble with it reading 0.040" fiducials. Our work is very low volume so we just manually spot the ones it can't read. We do not clean the fiducials. Instead we increased the fiducial size to 0.060" and it has b
Electronics Forum | Tue Nov 25 08:36:32 EST 2014 | bobpan
Tep stands for the transport card. The board is located in the front bottom left of the machine and should be by itself and have green and red leds lit on the top of it. I would try to reseat the card and then try to reboot the machine. If the proble
Electronics Forum | Thu Jul 25 14:18:34 EDT 2019 | babe7362000
It's been awhile but I was wondering if anyone knows how to read the LED's on the Tep board to what they mean. Top 4 Red 1. blinking red 2. lit red 3. off 4. lit red 5. lit red 1. blinking green 2. not lit 3. lit green 4. off 5. off On the Gui
Electronics Forum | Mon Jan 20 03:50:37 EST 2020 | falconex_technician
Hi, my company bough second hand pick and place as our second machine. After first transport after start just when initializing, It's showing problem with Z calibration. After second position setup and connect again after month, now showing &
Electronics Forum | Sat Jan 26 15:47:10 EST 2019 | dfl
I'm with an annoying problem with an IV-c. Almost all the time the Y-axis "stuck" when the machine is homing. The motor tries to move the axis but only make a sound. If I move the axis by hand it can complete the homing and then goes to the IDLE. So
Electronics Forum | Thu Sep 05 21:31:36 EDT 2013 | nophsem
Hi: Our machine (QUAD 4C) has a CyberOptics laser 6604033; when initialize at HOME, z-rod descends and doesn't retracts, which makes me think that the laser is misaligned, here's a link to the video recording: http://www.youtube.com/watch?v=W9ma7Zsf
Electronics Forum | Mon Mar 14 08:35:27 EST 2005 | ???
no...its losing its position and it homes ok so the sensor is not the problem.....there is a mod code that sets the illumination level for the quad align....make sure that is at 200 or higher. You may want to change the qa card if you have another on
Electronics Forum | Wed Nov 11 06:59:20 EST 1998 | Jim Mitchell
Scott - Good to see things are going well for you. With regard to your comments, Quad has introduced a complete line of Semi-conductor/APT machines (Q Series) that support both SMT and Semi-conductor applications. The machines were introduced in 19
Electronics Forum | Tue Apr 23 12:17:28 EDT 2002 | binns
I have a couple of questions for you, and a couple of answers. 1. Which model ? (100, IIc, IVc, QSV, QSP ) 2. In reference to how the machine stacks up with Fuji and Panasonic. They have never stacked up. Those families of machines have historicall
