Industry News | 2021-12-28 20:23:06.0
As is known to us, rotary encoders consist of incremental encoders and absolute encoders. And absolute encoders are much more expensive than incremental encoders. In fact, both two types of encoders are used for position measurement. So what's the point of using an absolute encoder? For distance measurement applications, both incremental and absolute encoders can be chosen - from a technical point of view. The advantages of absolute encoders are reflected in accuracy and performance, while incremental encoders seem more economical and practical.
Industry News | 2022-11-04 06:31:10.0
Viscom AG's Technology Forum has a reputation for offering participants wide-ranging content with valuable practical relevance in a compact format. Looking at the big picture is a key aspect as well. Held at the beginning of October, the event on Viscom's campus in Hanover, Germany, again offered extensive opportunities to experience cutting-edge inspection solutions for electronics manufacturing live and discuss important topics with fellow specialists, just as before the pandemic. Those unable to attend the Forum in person had the chance to participate in the interactive online program.
Electronics Forum | Thu Sep 23 14:39:10 EDT 2010 | markgray
What is the exact message on the screen?
Electronics Forum | Mon Sep 20 06:29:27 EDT 2010 | darrenleebs
i have an old contact 3av pick and place machine that has started to display placement head position errors. the machine seems to start working if you switch it on and leave it for a couple of hours to warm up. has anybody had simillar issues with th
Electronics Forum | Thu Sep 23 11:37:43 EDT 2010 | flipit
I had 4 of these machines. They are good machines but I have seen this error often. Is the problem only on one head L or R? If so swap electronics L to R and see if it follows. You can even swap the Y motors. The items that could cause this prob
Electronics Forum | Fri Sep 24 16:01:07 EDT 2010 | dougt
I remember this problem but can't remember exactly what the reason was. It might have been the wrong pullup resistor on the MEI interface board used for the home photo on the y axis. You are right, after a couple hours the machine would work fine.
Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Mon Jun 12 17:54:17 EDT 2017 | simons
The machine does not move to the home position. Once we hit the "Home" button all three heads will move up to the "Home" position but then 5 to 10 seconds later the following error pops up "Error 1531 - Z Axis motor alarm" before any "xy" movement i
Electronics Forum | Mon Jun 12 11:04:20 EDT 2017 | bobpan
So what your telling me is kind of vague. Does the machine home and go to the front left corner of the machine? If it does....this could be a quad align problem....meaning dirt on the lens or so-forth. You should watch the heads homing in the z-axi
Electronics Forum | Thu Jun 08 18:40:44 EDT 2017 | simons
We have a Samsung that we have replaced all the amps and are still getting the Z axis motor alarm failure. On the “Position Window” before and after we try to “Home” the machine, the values for “Z-Axis” for all three heads prior to the “Home” action
.gif)
.png)
