Electronics Forum | Sun Sep 27 06:00:24 EDT 1998 | Roni Haviv
Hello, I need some users information about "Air knif" in wave soldering: 1. Does it decreases bridging ? 2. Is it self installed of a purchesed kit (if purchesed, who are the recomended vendors) ? 3. Any other information about the issue.
Electronics Forum | Mon Sep 28 10:12:53 EDT 1998 | Chrys
| Hello, | I need some users information about "Air knif" in wave soldering: | 1. Does it decreases bridging ? | 2. Is it self installed of a purchesed kit (if purchesed, who are the recomended vendors) ? | 3. Any other information about the issue. |
Electronics Forum | Thu Feb 08 09:07:22 EST 2001 | Hussman
OK, without knowing the specifics, why does everyone blame the oven? Most solder balls occur around R's and C's in almost every shop I've been to. The best place to start looking is the screen printer - not the oven. Sure the oven is the last proc
Electronics Forum | Tue Sep 18 12:44:38 EDT 2007 | hussman
Simply ask your board manufacturer to Hot Air Solder Level the boards. HASL is a very common procatice at all board houses. Should not add cost and now your board meets this spec before you even touch it.
Electronics Forum | Thu Jul 20 16:28:55 EDT 2000 | Bob Willis
Most robust wave soldering machines will cope with lead free alloys. The temperatures in air that we have run has been between 260-265C. In my opinion the dross generation has not been significantly effected. I was doing a workshop for a well known
Electronics Forum | Mon May 16 18:03:30 EDT 2005 | davef
Key Issue: Will this machine solder your boards? You never know until you solder one. Any other avenues of analysis involve substantial risk. Flux Selection * High or low solids * VOC or VOC-free Solder Alloy * If using lead-free, avoid stainles
Electronics Forum | Mon May 10 08:00:14 EDT 1999 | Timothy O'Neill
| | | | I am about to embark on an effort to evaluate 3 different solder material suppliers and their recommended materials for our assembly process, in an effort to find the best supplier/material. We do mixed technology, with NOCLEAN chemistry so
Electronics Forum | Sun Apr 25 11:18:45 EDT 1999 | Earl Moon
| Hello all, | | Been doing some comparisons on joints made using the soldering iron versus reflowed solder paste (on a QFP package). The difference is quite significant: the joints made by the soldering iron are inconsistent and in many cases not
Electronics Forum | Thu Jun 18 10:57:28 EDT 1998 | Mike Moninger
| We offer an upgrade service for notebooks with 486 SX/DX CPUs up to 586-133 MHz using the AMD 5x86-133 MHz CPU in the PQFP package. We are pretty succesful with this service and until today we did more than 1000 notebook upgrades this way. | Now,