Electronics Forum | Tue Feb 05 14:35:30 EST 2013 | rway
In order to test a reed switch on the Teradyne, you will need an electro-magnet mounted inside the fixture. It will need to be mounted directly under the reed. First perform the passive testing (TVSV or Cont), then the active test. Drive the coil
Electronics Forum | Fri Aug 08 11:37:09 EDT 2008 | pjc
Yes, sure. In fact in some applications ICT is coming back. Mainly due to the fact that more and more SMT discrete components have no markings, so AOI cannot tell you if you have the correct value on the PCB. Fixed pin or flying probe ICT is a valuab
Electronics Forum | Mon Aug 24 18:34:31 EDT 1998 | Steve Evers
| Any competition for Teradyne on this front? Any users out there with comments? | Thanks in advance. | G If your new to the world of Fying Probe ICT you may think this is a new developement. Its not, this technology has been around for 10+ years. M
Electronics Forum | Wed Nov 26 07:45:24 EST 2008 | davef
Investigation of Device Damage Due to Electrical Testing, R Croughwell & J McNeill, Worcester Polytechnic Institute Abstract: This paper examines the potential failure mechanisms that can damage modern low voltage CMOS devices and their relationship
Electronics Forum | Tue Aug 21 19:24:15 EDT 2012 | rway
Checksum will work if all your doing is analog/passive testing. Checksum systems do not have digital test capability. I would recommend a Teradyne z18xx system. We use 8 of them in our plant and have been for years. Used, these systems range from
Electronics Forum | Mon Mar 29 12:10:14 EDT 2010 | rway
Test Jet will work for catching lifted leads, certainly. X-ray is the only thing for testing for internal solder defects such as voids and cracks. I personally do not have any experience using X-ray, so I cannot advise on its reliability. Perhaps
Career Center | Appleton, Wisconsin USA | Engineering,Production,Research and Development,Technical Support
I have more than 25 years of experience in electronics manufacturing and printed circuit board (PCB) structural test. My forte is in-circuit test (ICT) program and fixture development and debug on the HP/Agilent 3070. I have more than 16 years of 3
Career Center | Riyadh 11623, Philippines | Engineering,Maintenance,Production
PROFESSIONAL EXPERIENCE: Connected in the field of manufacturing/electronics industry experienced in the line, Through Hole and Surface Mount Technology, worked on various Fuji Machines Universal model, such as: CP 643E chip shooter QP 242E chip mou
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
I.C.T Industrial Park, Building 1
Dongguan, 30 China
Phone: +86 13670124230
