Electronics Forum | Tue Sep 08 23:12:57 EDT 2020 | SMTA-64387687
Have you tried rotating the board 90 or 180 going into the oven? With inductive components there's a possibility of magnetic current buildup, that pulls the component to one of the pads. Although, I've only seen it on larger inductors. Also, the pres
Electronics Forum | Mon Feb 20 09:20:07 EST 2006 | dpmilk
It appears to us that the problem lies in the lead-free solder paste rather than the inductors. We have not found a lead-free solder that does not do this. The green is on the copper wire. We believe it gets there during the reflow. The gasses fr
Electronics Forum | Sat Sep 06 05:11:21 EDT 2014 | padmalathab
Hi Thanks for responding to my query. Our PCB Assembly consists of both SMD and THD components. Also,assembly will be done by machine as well as Hand soldering based on the requirement. I request you to suggest Poka yoka tool to read the value of
Electronics Forum | Fri Jun 30 06:47:51 EDT 2006 | AR
Hi All the other components on the PCB solder just fine, including resistors, ceramic capacitors, inductors, SOT23 etc. etc. so I do not think that it is a PCB problem. It is clearly focussed on this single component. Haven't yet tried scraping or
Electronics Forum | Sat Feb 06 16:28:09 EST 2010 | mystkldy
I have some large ROHS SMT inductors that are moving during the reflow process. I have tried adding extra solder, gluing and doing both. I don't know what else to try, any suggestions?
Electronics Forum | Mon Apr 07 15:22:17 EDT 2014 | garym4569
Found the issue. The footprint is incorrect. The inductor completely shields the paste from heat. Slid the inductor on the pad to expose the pad and paste, and perfect solder joint. This part was a last minute design change with a larger body.
Electronics Forum | Thu Feb 16 16:16:19 EST 2006 | fredc
We saw something like this in the machine shop years ago. Fumes from a soldering operation in the shop turned exposed iron and steel tools and the spindle on my Bridgport mill green. Can your supplier apply plating or a coating to the exposed parts o
Electronics Forum | Mon Feb 20 07:59:50 EST 2006 | dpmilk
We saw something like this in the machine shop > years ago. Fumes from a soldering operation in > the shop turned exposed iron and steel tools and > the spindle on my Bridgport mill green. Can your > supplier apply plating or a coating to the >
Electronics Forum | Thu Jun 29 02:16:07 EDT 2006 | AR
We are experiencing some difficulties with reflow soldering a 1210-sized MOV with silver/palladium finish. The PCB finish is SAC. When inspecting the board after reflow it seems that nearly all solder is gone both from the pads and the component term
Electronics Forum | Thu Dec 17 06:22:37 EST 2015 | sarason
AN inductor probably 22uH 5A. Check a TDK catalogue http://en.tdk.eu/inductors Another approach is identify the power control IC next to it and look up the App note associated with it, 9 times out of 10 it will be the same as recommended. Are you s
.png)
