Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
Used SMT Equipment | SMT Equipment
Model No：KS-6004-S Portable conveyor Cycle time：Approx 15seconds Power supply：100-230V AC (customized), single phase Power load：Max 150V/A Air pressure： 4-6 bar Air volume：MAX 10L/minute Transport height：900±20mm (or customized) Transport di
Model NO. : GW-UL250L , GW- UL330L ,GW- UL390L ,GW- UL460L PCB size(L×W)~(L×W) :(50×50)~(350×250),(50×50)~(455×330),(50×50)~(530×390),(50×50)~(530×460), Machine size (L×W×H) : 1370×750×1200 , 15
New Equipment | Board Handling - Conveyors
product instruction ※ Easy to operate touch screen control interface ※Telescopic structure, width adjustable, easy to walk ※ Photoelectric sensors with protection, more secure ※ Smooth and parallel width adjustment (lead screw) ※SMEMA port is c
New Equipment | Board Handling - Conveyors
product instruction ※ Easy to operate touch screen control interface ※Telescopic structure, width adjustable, easy to walk ※ Photoelectric sensors with protection, more secure ※ Smooth and parallel width adjustment (lead screw) ※SMEMA port is c
New Equipment | Board Handling - Conveyors
Model No: KSUN 250 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A Air pressure: 4-6 bar, MAX 30L/minute Transport height:
New Equipment | Board Handling - Conveyors
Model No: KSUN 460 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A Air pressure: 4-6 bar, MAX 30L/minute Transport height:
New Equipment | Board Handling - Conveyors
Model No: KSUN Automatic loader PCB loading time: Approx 6 seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized), single phase, MAX 300V/A Air pressure: 4-6 bar, MAX 10L/minute Transport height: 900±20mm (
New Equipment | Board Handling - Conveyors
Model No: KSUN 330 Automatic loader PCB loading time: Approx 6 seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A Air pressure: 4-6 bar, MAX 10L/minute Transport height: 900±2
New Equipment | Board Handling - Conveyors
Model No: KSUN 390 Automatic loader PCB loading time: Approx 6 seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC ( customized ), single phase, MAX 300V/A Air pressure: 4-6 bar, MAX 10L/minute Transport height: 900±2
.gif)