Industry News | 2013-11-05 10:04:10.0
Marquardt GmbH of Rietheim-Weilheim (Germany)uses the Viscom S3088 SPI3D solder paste inspection system.
Industry News | 2022-01-10 16:28:20.0
Once again, customers looking for leading-edge test solutions can come to Seica's booth 1100 and view the future of Flying Probe test in the form of the new PILOT VX platform. Fast, Powerful and Smart: the Pilot VX raises the bar of flying probe test performance, with cutting-edge solutions that address the fundamental concerns of electronic board manufacturers looking to optimize their investment.
Electronics Forum | Mon Jul 10 21:01:06 EDT 2000 | Dave F
Edmund: Responding to your questions: 1 What is purpose of using DI water to wash a PCBA? Compared to tap water, DI water is less likely to leave: � Metal cations on sensitive components. � Salts of Ca, Mg, and other stuff on metals on the assemb
Electronics Forum | Thu Jan 08 16:43:43 EST 2004 | Dean
Unless your machine (internal) thermocouples are each calibrated and compensated no two machines will deliver eactly the same results. Here are your challenges: 1. Data acquisition equipment A-D converter errors 2. PCB measurement thermocouple (t
Electronics Forum | Fri Jul 13 12:32:14 EDT 2007 | rgduval
We've experienced this issue with SN100. A couple of things we've tried, all with varying levels of success: 1. Longer pre-heats. We use SN100 in a solder pot, and pre-heat the boards on our wave machine. This did have a positive effect, but I ne
Electronics Forum | Mon Jul 16 08:42:14 EDT 2007 | realchunks
Hi Scott, Here is another thought. Check your wave solder machine visually. Does the wave flow on both sides of the nozzle? If not, you may have some dross build-up which may be causing your problem. Generally it will only happen on the very fir
Electronics Forum | Fri Jul 13 11:33:54 EDT 2007 | realchunks
Just starting and already responsible for product quality and machine adjustment? Wow, you poor bastard. Ok, I will assume this problem happens on the bottom side of the board with a thru-hole IC. The short occurs on the side that doesn't have the
Electronics Forum | Thu Sep 06 15:36:27 EDT 2007 | kpm135
My company recently aquired an asymtek coating machine and I have been using Humiseal 1B31, an acrylic coating, in it to coat all the boards given to me. They have now come to me and asked if it is possible to run Humiseal 1A33, a urethane coating, t
Electronics Forum | Wed Sep 25 15:58:36 EDT 2002 | bschreiber
Hello Dave, I hope that electronic slap didn�t hurt too much. Robf, I am sorry that you did not agree with my initial response, but the answer is very detailed and most of the support material I have is only in paper format so I need to either snai
Electronics Forum | Thu Mar 30 07:10:56 EDT 2017 | nickywan
I have a problem with some particle, dust and solder paste contaminate on PCB rack and need to clean up once a week by manual. Now looking for the equipment to do Inline cleaning with water jet & Hot air Dry concept. Not too big machine and concept l
