Full Site - : ionic cleanliness testing failed (Page 2 of 33)

Practical Support on Cleaning and Contamination Monitoring Processes Printed Board Assembly Cleaning and Contamination Testing Center to Debut at IPC APEX EXPO 2013

Industry News | 2012-12-03 19:52:39.0

Printed Board Assembly Cleaning and Contamination Testing Center marks its debut at IPC APEX EXPO®, February 19–21, 2013, at the San Diego Convention Center.

Association Connecting Electronics Industries (IPC)

PCBA Cleaning Machine

Industry News | 2022-10-12 11:23:36.0

In the SMT industry, there are many types of cleaning machines. According to the cleaning things, there are stencil cleaner, PCBA cleaner, Wave Oven Pallet/Fixture cleaner, Mis-Print PCB cleaner, Squeegee cleaner, Nozzle cleaner, PCB surface cleaner and so on.

Dongguan Intercontinental Technology Co., Ltd.

Volunteers Honored for Contributions to IPC and the Electronics Industry

Industry News | 2019-02-11 19:44:42.0

IPC presented Committee Leadership, Special Recognition and Distinguished Committee Service Awards on January 28 and January 30 at IPC APEX EXPO 2019 at the San Diego Convention Center. The awards were presented to individuals who made significant contributions to IPC and the industry by lending their time and expertise through IPC committee service.

Association Connecting Electronics Industries (IPC)

HeatShieldGel™ - Thermal Protection of Electronic Components During Reflow

HeatShieldGel™ - Thermal Protection of Electronic Components During Reflow

New Equipment | Rework & Repair Equipment

BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic components. It is truly a revolutionary means to protect components. It

BEST Inc.

HeatShieldGel(TM)

HeatShieldGel(TM)

Videos

To order, visit http://www.solder.net/products/heatshieldgel-tm/ BEST HeatShield Gel™ is a thermal shield water-based gel designed to be used in the PCB rework/repair or board assembly areas in order to provide thermal protection of electronic compo

BEST Inc.

Award for New Product Innovation Announced

Industry News | 2016-04-20 10:27:40.0

BEST, Inc. was presented Circuit Assembly’s NPI Award for its HeatShield Gel™ high temperature shielding product at the IPC APEX Expo on Feb. 24 in San Diego, Calif.

BEST Inc.

BEST Developes Revolutionary Gel for Masking of Parts

Industry News | 2016-01-05 16:10:10.0

Novel method for protecting electronic components from heat.

BEST Inc.

Comparison of ROSE, C3/IC, and SIR as an effective cleanliness verification test for post soldered PCBA

Technical Library | 2023-04-17 21:17:59.0

The purpose of this paper is to evaluate and compare the effectiveness and sensitivity of different cleanliness verification tests for post soldered printed circuit board assemblies (PCBAs) to provide an understanding of current industry practice for ionic contamination detection limits. Design/methodology/approach – PCBAs were subjected to different flux residue cleaning dwell times and cleanliness levels were verified with resistivity of solvent extract, critical cleanliness control (C3) test, and ion chromatography analyses to provide results capable of differentiating different sensitivity levels for each test. Findings – This study provides an understanding of current industry practice for ionic contamination detection using verification tests with different detection sensitivity levels. Some of the available cleanliness monitoring systems, particularly at critical areas of circuitry that are prone to product failure and residue entrapment, may have been overlooked. Research limitations/implications – Only Sn/Pb, clean type flux residue was evaluated. Thus, the current study was not an all encompassing project that is representative of other chemistry-based flux residues. Practical implications – The paper provides a reference that can be used to determine the most suitable and effective verification test for the detection of ionic contamination on PCBAs. Originality/value – Flux residue-related problems have long existed in the industry. The findings presented in this paper give a basic understanding to PCBA manufacturers when they are trying to choose the most suitable and effective verification test for the detection of ionic contamination on their products. Hence, the negative impact of flux residue on the respective product's long-term reliability and performance can be minimized and monitored effectively.

Jabil Circuit, Inc.

Austin American Technology Mega ION for high-rel applications requiring ROSE testing

Industry News | 2020-06-24 15:27:46.0

Austin American Technology (AAT) is pleased to offer the Mega ION® cleaning system designed for solvent based, high reliability applications requiring product cleanliness verification (IPC ROSE Testing). It is used for final clean prior to conformal coat, encapsulation or other sealing operations used to protect electronic modules.

Austin American Technology

CM Series - Ionic Contamination and Cleanliness Test

CM Series - Ionic Contamination and Cleanliness Test

New Equipment | Cleaning Equipment

CM11 , CM 22, CM33. CM60   – Ionic Contamination and Cleanliness Test Systems to MIL & DEF standards.

Ascentech LLC


ionic cleanliness testing failed searches for Companies, Equipment, Machines, Suppliers & Information

2024 Eptac IPC Certification Training Schedule

Stencil Printing 101 Training Course
One stop service for all SMT and PCB needs

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Global manufacturing solutions provider

World's Best Reflow Oven Customizable for Unique Applications
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

High Precision Fluid Dispensers
PCB separator

Private label coffee for your company - your logo & message on each bag!