Electronics Forum | Tue Nov 28 09:37:39 EST 2006 | GS
Have you seen IPC-A-610 D ? regards GS
Electronics Forum | Wed Nov 29 11:46:57 EST 2006 | slthomas
IPC 610 *C* states that the solder thickness requirement is a properly wetted termination is evident. Fillet height is another aspect and is usually specific to the package but is some function of solder thickness plus a percentage of lead height. D
Electronics Forum | Tue Nov 28 15:10:50 EST 2006 | M. Sanders
Unfortunately, I don't have a copy of IPC-A-610 D on hand, however, I believe in IPC-610, this �floating height� between lead and pad has no maximum specification restriction. As long as there is no voiding, it is still acceptable for all 3 classes.
Electronics Forum | Fri Jul 08 16:35:04 EDT 2005 | Jason Fullerton
"Whether or not you need a toe fillet depends on your application. We have high reliability products where we can't use a QFN over a certain size, regardless of toe fillet. We have other applications where we meet the thermal cycle requirements for a
Electronics Forum | Wed Sep 12 03:52:45 EDT 2018 | shascoet29
Hi, Is the IPC-A-610 applicable to CSP assemblies? Especially regarding the solder ball to solder ball distance versus the minimum electrical clearance for assembly(0.13mm/IPC-A-610). With a 0.4mm pitch component and 260 microns diameters balls, thi
Electronics Forum | Mon Mar 23 17:14:55 EDT 2009 | blnorman
That's one of the old IPC-A-610 revs. The latest, Rev D removed the size allowables and put in a general criteria statement(section 5.2.6.1).
Electronics Forum | Wed Apr 28 14:58:39 EDT 2004 | davef
Solder ball acceptability: IPC-A-610, 6.5.3.1 & 12.4.10
Electronics Forum | Wed Mar 24 15:10:23 EST 2004 | davef
Without a proper picture, I'd reject the parts that you describe based on IPC-A-610, 7.2, which says words to the effect: Defect - Class 1,2,3 - Dirt and particulate matter on assembly, eg, dirt, lint, dross, metallic particles, etc. Absence or pres
Electronics Forum | Tue Mar 17 07:32:10 EDT 2009 | davef
Solder ball acceptance: IPC-A-610, 6.5.3.1 & 12.4.10. Solder balls: 5 ball system: * No more than 5 balls per square inch (100mm2) allowed * Solder balls can not be greater than 5 mil (0.005in) (100um) * Solder balls cannot be less than 5 mil (100um)
Electronics Forum | Fri Oct 13 08:09:41 EDT 2017 | davef
While I wouldn't be happy with this "Hershey's Kiss" appearing solder connection, I'd suck it up and and accept it as acceptable according to IPC-A-610F, Section 5.1
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100
.png)
