Electronics Forum | Tue Feb 11 12:59:06 EST 2020 | astarotf
Hi Steve Thomas Effectively by IPC-610 standard specifies in the "content 8.2.13 Quad Flat Pack Plastic Package - Without Terminals (PQFN), Table 8-13, page 8-84" which depending on the class of manufacture notes 2-5 of the table, which in theory do
Electronics Forum | Tue Jan 26 16:29:48 EST 2021 | charliedci
We will be exploring the exciting world of step stencils for the first time and I am looking for any advice from anyone using regularly. This direction is because we have large caps and soldered standoffs along with medium pitch LGA's and QFP's on sa
Electronics Forum | Fri Feb 17 13:10:34 EST 2006 | amol_kane
I have Immersion Ag and Immersion Sn LF boards that were waved using SAC305 alloy. I have a lot of tears/shrink voids in the waved connections. I am aware that SAC305 in wave has a propensity of shrink tears/voids due to the non eutectic property of
Electronics Forum | Thu Mar 03 16:41:11 EST 2005 | davef
According to an on-line posting ... SMTA On-line Presentation Comparing Industry Standard Revisions March 9: IPC-A-610 with Regards to Lead-free Technology There have been extensive and significant changes to the industry standard IPC-A-610 with th
Electronics Forum | Sat Jun 17 08:57:23 EDT 2000 | Chrys Shea
A few more tricks to try: - Got a hot air rework machine? You can get more controlled heat on the area and lower the risk of damage to the fab. I never got topside fillets un unrelieve ground planes until I went to convection preheat on my waves.
Electronics Forum | Wed Jun 12 11:26:50 EDT 2002 | pjc
Sean, Have you contacted Speedline Technologies applications enegineers? They have a lot of knowledge about SPOTT working with customers over the years to develop the process. I myself have experience doing SPOTT. I used Fuji GSP2 printers with overs
Electronics Forum | Fri Apr 06 09:02:20 EDT 2001 | CAL
FYI- Toe Fillets have not been required per IPC 610b/c (they are nice to have though). Remember before Solder paste inspection equipment The Solder powder type/size, stencil type, and apertures are what defined volume. The need has not been until rec
Electronics Forum | Thu Jan 16 04:02:18 EST 2003 | johnw
The IPC 610 actally conflict's with 7095 which give's a better indication of what's acceptable. I believe that IPC are reviewing both. Motorola did a bunch of work before basically showing that void's aren't that bad up to a certain size, I think pro
Electronics Forum | Tue Feb 04 18:46:01 EST 2003 | slthomas
"Use the pad mating to lead wetting area." If I get your drift, we're talking about the minimum lead area (assuming the pad has an area that's at least as large as the lead) required to be wetted by IPC-610. Hmmmm...that would take some calculation
Electronics Forum | Mon Oct 13 12:28:11 EDT 2003 | Andrea
Up until this point, my company has been hand soldering all of our assemblies. We are a high reliability manufacturer and work to the IPC-610 Class three/ target. We just received a Reflow Solder Batch Oven. It is a small oven, a Gold-Flow GF-B. I ha